Technicolor - Thomson 2 8 D G 1 6 E T CRT Television User Manual

United Kingdom
The plug is fitted with a fuse which protects your
television.Ifyour televisiondoes not work,the fuse may
be blown.Inthis case,replace itwith anidentical5 Amp
ASTA orlr BSI(BS1362) certifiedfuse.
Note:the mains leadof your televisionis fittedwith a
mouldedplug. This leadcontains allthe safety equipment,
so you areadvised whenreplacingit notto usea
non-specific commercially-availablemodel.
* on models equipped with this function
Basic connections
Basicconn ection s
The mains plug (1) supplies power to the television. The
television must only be plugged in to a 220-240 V - 50 Hz
power supply. It must never be plugged in to a DC source.
Should the plug become separated from the lead, never
The aerial socket (2), located on therear ofthe television, can
be used to connect an external aerial or other appliance
equipped with a modulator such as a VCR, satellite receiver,
If you connect an appliance to the aerial jack, you must give
it a channel number. To do this, switch on the appliance, then
use the television to find the modulator channel (see the
appliance manual). Now give it a programme number and
memorise it (see Manual Programming of channels). Then,
when you wish to use the appliance, simply select its
programme number on the television. This procedure is not
required for VCR’s not equipped with a modulator.
The SCART socket AV1 (2), located on the rear of the televi-
sion, is intended to connect a VCR or a camcorder (VHS, 8
mm), a Canal+ decoder, a video games console or RGB-sig-
nal emitting appliances.
We strongly recommend the use of this type of connection,
which gives a better picture quality. To use the peripheral
appliance that you have connected, press the AV key onyour
remote control to select AV1. This selection is automatic for
some appliances. Pressing “”play” ona VCR, or switching on
asatellitereceiverconnectedto AV1will automatically switch
on your television.
When you stop the VCR, if you have not changed channels
while watching the VCR, the television automatically
switches back to the channel you were watching beforehand.
If the television has been switched on from the VCR, it
switches to standby when the VCR is switched off. The
television automatically switches to 16/9 format if the
connected appliance delivers the corresponding signal.
The headphone socket (3)* is provided to connect a
headphone or earphones.
Connecting headphones mute the sound from the
television loudspeakers.
YourTV isprovidedwith aheadphonesocket forste-
reo headphones, do not use a mono headphone or