Filter
Top Products
11
4. CHANNELS SET-UP
Note :If you use the device as LCD Monitor function not a TV, you may skip the chapter.
Initial set-up
AUTOMATIC INSTALLATION
Return
Standard
EURO…
Start
Running…
Frequency
150.75MHz
Programmes found
02
Initial set-up involves selecting all the settings required
to be able to search for and store all the channels you
can receive.
Make sure that the television is switched on and
follow all the steps in turn specified on this page.
1. When you first switch the TV set on, the language selection menu appears.
Choose which language you want the menus to appear in using the Ÿ / ⁄ buttons.
When you select a language it is applied to the menus immediately.
2. Confirm with OK. A list of countries appears.
3. Select the relevant country using the Ÿ / ⁄ buttons.
This is the country you are in, or the country whose channels you want to receive if live near its borders.
4. Confirm with OK. The AUTOMATIC INSTALLATION menu is displayed.
5. The Standard option is selected.
Select a suitable standard using the / ÿ buttons.
Note: the following standards are available to choose from: UK for the UK and Ireland, FR for France and
Luxembourg, DK for Eastern Europe, the Middle East and Asia, EURO for Western Europe, Australia and New
Zealand.
6. Then select the Start option using the ⁄ button and press OK to start the search.
During this time the message “Running” appears next to the Start option and the Frequency and
Programmes found options appear, informing you of the installation procedure’s progress.
If you press the EXIT button before the end of the search the channels already found are stored.
Once the search has ended the ORGANISER menu appears (see following page).
Note : You may subsequently return to AUTOMATIC INSTALLATION menu :
Display the OVERVIEW menu by pressing the MENU button.
Select the Installation option and press OK to confirm.
Select the relevant country and press OK.
Select the Automatic Installation option from the INSTALLATION menu and press OK to confirm.