Filter
Top Products
13
Manual channel set-up
Follow the procedure given on this page if you find that some channels have not been stored during the initial
set-up. This can happen if you are setting up cable network channels. Setting up channels manually requires
every setting for a particular channel to be entered, one at a time.
MANUAL INSTALLATION
Return
Standard
EURO…
Frequency
150.75MHz
Programme name
BBC2
Fine-tuning
------|----------
Store on programme
02
Decoder
o
Teletext char. set
1…
Display the OVERVIEW menu by pressing the
MENU button.
Select the Installation option and press OK to
confirm.
Select the relevant country and press OK.
Select the Manual Installation option from the
INSTALLATION menu and press OK to confirm.
1. Select the Standard option and then the relevant standard for your country using the / ÿ buttons.
Note: the following standards are available to choose from: UK for the UK and Ireland, FR for France and
Luxembourg, DK for Eastern Europe ,the Middle East and Asia, EURO for Western Europe, Australia and New
Zealand.
2. Select the Frequency option. Use the or ÿ button to start the search in ascending or descending
order. When a channel is found pictures appear.
Note : If the channel name is found,it is displayed next to Programme name option.
3. If the picture is not clear you can adjust the setting. You do this by selecting the Fine tuning option and
adjusting it with the / ÿ buttons.
4. If the channel is encrypted and you want to connect a decoder, select the Decoder option and check the
box by pressing the OK button.
5. Then select the Teletext char. set option and choose the character set that will be used for Teletext on
this channel using the / ÿ buttons. The following character sets are available:
1 :Western Europe
2 : Eastern Europe
3 : Turkish and Greek
4 : Russian and Bulgarian
5 :Arabic
6 : Farsi
The character set selected determines how characters are displayed on Teletext screens.
6. Select the Store on programme option to assign a number to the channel. Enter the number using the
numeric buttons. Press the OK button to confirm.
Important: as soon as you change a setting in the MANUAL INSTALLATION menu the channel number starts
flashing under the Store on programme option .To confirm your change you must select the Store on
programme option and press OK. If you do not confirm the change it will be cancelled when you change channel or
put the television into standby mode.
Repeat this procedure (2 to 6) to find other channels.
Automatic update:
Auto update allows you to set up channels just launched or any channels that are missing or wrongly set up.
You can access the menu by selecting the Automatic update line in the INSTALLATION menu.
Return: returns to the INSTALLATION menu.
Standard: Select the relevant standard for your country using the / ÿ buttons.
Start: Press OK to start the auto update function.
The Frequency is incrementing for showing the progress of the search, “New pr. found” is incremented
each time a PR that was not already installed is found. When the highest frequency is reached, the auto update
will stop. Or if you press EXIT button, you will stop the auto update searching also.