Filter
Top Products
6
Chapter 2 Channel set-up
EN
Initial set-up
Initial set-up involves selecting all the settings required to be able to
search for and store all the channels you can receive.
Make sure that the television is switched on and follow all the steps in
turn specified on this page.
1. When you first switch the TV set on, the INSTALLATION menu appears and the Language option is selected.
Choose which language you want the menus to appear in using the buttons.When you select a language it is
applied to the menus immediately.
2. Select the Auto. Instal. option using the button and press OK to confirm.
3. A list of countries appears, over two pages. Select the relevant country using the and buttons.
Press OK to confirm.
Note:This is the country you are in, or the country whose channels you want to receive if you live near its borders.
4. The relevant menu appears with the Standard option selected. Select a suitable standard using the buttons.
Note: the following standards are available to choose from: UK for the UK and Ireland, FR for France and Luxembourg, DK for Eastern Europe,
the Middle East and Asia,
EURO for Western Europe,Australia and New Zealand.
5. Then select the Start option using the button and press OK to start the search. During this time the message
“Running” appears next to the Start option and the Frequency and PR options appear, informing you of the
installation procedure’s progress.
If you press the EXIT button before the end of the search the channels already found are stored.
Once the search has ended the
ORGANISER menu appears (see below).
You may subsequently return to AUTO. INSTALLATION menu.
Display the
OVERVIEW menu by pressing the MENU button.
Select the
Installation option and press OK to confirm.
Select the
Automatic Installation option from the INSTALLATION menu and press OK to confirm.
Select the relevant country using the
/
and press OK.
Organiser
Using this menu you can change the order the channels have been
arranged in during automatic set-up, name and rename channels and
delete duplicate channels or those with poor reception quality.
Follow the help messages at the bottom of the screen and refer to a TV
programme guide to help identify the channels.
Arranging channels in order
The Select PR line is selected.
Display the channel number to be changed using the PR+/PR- buttons or the 0-9 keys.
Select the option Swap with PR.
Enter the new programme number using the 0-9 keys.
Press OK to confirm.
When you successfully finish the swap, the bottom help line will show “The programmes have been swapped“
message.
Follow the same procedure for the other channels.
Deleting channels
The Select PR line is selected.
Display the channel number to be changed using the PR+/PR- buttons or the 0-9 keys.
Select the Delete PR option and press the OK button to delete the channel.
Once this channel has been deleted the bottom help line will show “ The programme has been deleted“ message.
ORGANISER
Return
Select PR 01.
Swap with PR - -.
PR name T . . . . .
Delete PR 01
Start: RIGHT key
Scroll up/down: UP/DOWN keys
Validate name: OK
AUTO. INSTALLATION
Return
Standard UK...
Start Running...
Frequency 150.75 MHz
PR 05
06-EFC030-EN.qxd 15/06/05 13:40 Page 6