Filter
Top Products
ENGLISH - 8 -
Dear Customer:
Thank you for purchasing our latest TV set.
Please read this instruction manual carefully first be-
fore operation so that you can use it in a safe and reli-
able manner and bring all its functions into full play.
Please also keep it properly for future reference.
Preparation
For ventilation, leave a space of at least 10 cm free all
around the set. To prevent any fault and unsafe situa-
tions, please do not place any objects on top of the
set.
Use this apparatus in tropical and/or moderate cli-
mates.
Features
It is a remote controlled colour television.
100 programmes from VHF, UHF bands or cable
channels can be preset.
It can tune cable channels.
Controlling the TV is very easy by its menu driven
system.
It has three Euroconnector socket for external de-
vices (such as computer, video, video games, audio
set, etc.)
Optional mono or stereo sound systems (German +
Nicam) are available.
Full function Teletext (Fastext).
It is possible to connect headphone.
Direct channel access.
A.P.S. (Automatic Programming System).
All programmes can be named.
Programme swapping between last watched two pro-
grammes.
Forward or backward automatic tuning.
Sleep timer.
Child Lock.
Automatic sound mute when no transmission.
When no valid signal is detected, after 5 minutes the
TV switches itself automatically to stand-by mode.
WSS (Wide Screen Signaling).
NTSC Playback.
YCbCr Mode.
Front AV in.
Headphone.
Before Switching on your TV
Power connection
IMPORTANT: The TV set is designed to operate on
240V AC, 50 Hz.
After unpacking, allow the TV set to reach the ambi-
ent room temperature before you connect the set to
the mains.
Connections to the RF input socket
Connect the aerial or cable TV plug to the RF input
socket located at the back of the TV and connect the
cable plug coming out from the TV out socket lo-
cated at the devices (VCR, DVB etc.) to this socket
as well.
How to connect other devices
IMPORTANT: Switch off the TV before connecting any
external device.
Sockets for external connections are at the back and
front of the TV. For connection of other devices via Eu-
roconnector refer to the manuals of the related devic-
es.
Inserting batteries in the remote control
handset
Place the batteries in the right directions as seen be-
low.
Remove the battery cover located on the back of the
handset by gently pulling upwards from the indicated
part.
Insert two AAA (R03) or equivalent type batteries in-
side.
Replace the battery cover.
EU2845ST&2845W-MAV-1541-ENG-STEREO-AK45.p65 09.09.2003, 10:548