Filter
Top Products
7.1 Recording a program 43
7.1 Recording a program
Once recording has started, a symbol like the left fig-
urewill be displayed onthe top right ofthe screenfor
a few seconds. When you are watching a service dif-
ferentfrom the service beingrecorded, you canview a number
on the center of the symbol, which indicates the order that the
recording is started.
NOTE
When a recording is finished, it might not be saved if its
recording duration is less than one minute.
7.1.1 Instant recording
To instantly record the program you are watching at present,
press the button. Pressing the button pauses the current
recording. To resume recording press it again.
After a recording is started,
pressing the displays a box
like the left figure, in which you
can set the recording duration.
To specify an arbitraryrecording duration, setthe Duration op-
tion as you desire with the
✄
✂
✁
V− and
✄
✂
✁
V+ buttons and press the
✄
✂
✁
OK button; the recording will end at the specified time.
If the information about the next program is provided by the
electronicprogram guide, the After this program and After next