Filter
Top Products
36 Listing Services
1.
Plug one end of a RS-232 cable (9 pin D-
sub cable) into the RS-232 port on the
digital receiver, and the other end into
the matching port on the other digital re-
ceiver.
2. Turn on the source digital receiver.
3.
Select the Installation
>
Transfer Data to
Other IRD menu, then you get asked for
confirmation; select Yes.
4.
To start the datatransfer, turn onthe target
digital receiver.
5.
A progress bar appears showing the
progress of the data transfer.
6.
Restart the targetdigital receiver whenthe
data transfer is complete.