Filter
Top Products
18
Using the TV’s
Features
TV Settings
Channel Input (CATV/TV)
It is necessary to set the receiving mode to CATV or TV to receive local broadcast
TV programs.
1. Press MENU and press VOL
– or + to select .
2. Press CH S or T to select
CHANNEL INPUT.
3. Press VOL – or + to select
CATV or TV.
4. Press MENU to exit.
Channel Auto Scan
Note:
Press CH S button from the
Remote Control to stop AUTO
SCAN.
Your TV can automatically detect all active channels in your area and store them in
the TV's memory. After the channels are stored automatically, you can manually
add or erase individual channels (refer to the next section).
1. Press MENU and press VOL – or + to
select .
2. Press CH S or T to select CHANNEL
AUTO SCAN.
3. Press VOL – or + to start this function.
4. Press MENU to exit.
When the AUTO SCAN window disappears,
the AUTO SCAN is completed.
Press CH S or T to view the programmed
channels.
Notes:
This delete/add channel action may
also be carried out via the menu
button.
1. Press MENU and press VOL – or
+ to select .
2. Press CH S or T to select
CHANNEL SKIP.
3. Press VOL – or + to select OFF
or ON.
Deleting / Adding a Channel
From your Remote Control, you may
also directly input the channel number
you wish to delete. Press SKIP
ON/OFF to delete the channel. The
newly deleted/added channel lettering
will change from green/red to red/green.
[CATV]
[ OFF]
[ OFF]
[ ]
ADJUST
[ SKIP ]
[ON AIR]
GREEN
RED
AUTO SCAN
15
Red
(SKIP ON)
15
Green
(SKIP OFF)