Filter
Top Products
E
S
F
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
Appendix
Index
Introduction
29
(E) 1520DL15
Using the PC setting feature
You can adjust the horizontal/vertical picture position, clock (to
minimize vertical stripes on the screen), and phase (to remove
horizontal noise and sharpen the picture).
You can auto-configure and reset these settings.
1. Confirm a PC is connected (see “Connecting a personal
computer (PC)” on page 15).
2. Repeatedly press TV/VIDEO to select PC input mode. (See
“Selecting the video input source” on page 20.)
3. Press MENU, and then press x or • until the PC menu appears.
4. Press ENTER, and then press y or z to select an item.
H-Position 76
H-Position
V-Position
Clock
Phase
Auto configure
Reset
PC
ENTER EXIT MENU
5. Press Enter.
6. Press x or • to make the appropriate adjustments.
• H-position/V-position
Adjusts picture left/right and up/down. The adjustment range
is 0–100. (The adjustable range may vary depending on the
input mode.)
• Clock
Minimizes any vertical bars or stripes appearing on the screen
background. The adjustment range is 0–100. (The adjustable
range may vary depending on the input mode.)
•Phase
Reduces (or minimizes) any horizontal noise and clears up or
sharpens the character images. The range adjustment is 0–100.
(The adjustable range may vary depending on the input mode.)
•Auto configure
Automatically adjusts the screen position, clock, and phase.
(The displayed image will disappear for a few seconds while
auto-configuration is in progress.)
•Reset
Returns to the default settings programmed at the factory. The
values in the Reset function cannot be modified.
CH
CH
RE
C
ALLTV
/
VIDEO
MUTE
P
O
WER
MT
S
ENTER
CCEXIT MENU
SLEEPSOUND PICTURE
FAV. CH
VOL VOL
2
1
1
3
5
4
6
8
7
0
9
1
00/
CH RTN
C
yzx •
MENU
ENTER
TV/VIDEO
TV top panel
POWERTV/VIDEO VOLUME CHANNEL
TV/VIDEO
#01E26-30_1520DL15 05.4.7, 1:20 PM29
Black