Filter
Top Products
English - 9 -
Initial Tuning and programme sorting
Before switching on the television put your decoder and media recorder to Standby if they are connected and
ensure the aerial is connected to your television. To set up the television use the buttons on the remote control as
detailed on
page 5.
Connect the mains plug and switch the TV into standby
using the top Power button. Press any numbered or
standby button on the remote control, the A.P.S. screen
will appear. This screen will appear the first time that
the television is switched on and each time the televi-
sion is reset.
Auto. Programming System
Language English
Country UK
Check the antenna cable
Start: Ok Exit: Exit
Txt. region West Europe
Use the Up or Down button to highlight the Language
and Country items. Press the Left or Right button to
adjust the highlighted item. Select Txt. region item by
pressing the Up or Down buttons. Use Left or Right
button to set Txt. region. Then press
OK button to start
tuning.
The television will start to search for available stations.
Auto. Programming System
APS is running: 78%
Exit: Exit
You must allow the television to complete the
search.
When the search is complete the television will automati-
cally select programme position 1. This may not be a clear
picture or the signal may be weak, so the station order can
be changed using
program table which will appear on the
screen.
P01
P01 BBC 1
P02 C 04
P03 P13
P12
P11
P04 P14
P05 P15
P06 P16
P07 P17
P08 P18
P09 P19
P10 P20
Program Table
Delete
Name
Move
A.P.S
Exit: Exit
With the list of stations now showing use the Up or
Down button to highlight the station you want to move
and press the
GREEN button.
Use the Up or Down button to move through the list to
the preferred position, as you do so the other stations
will move to make room, then press the
GREEN button
again. The selected station will be moved to the new
position.
Repeat as necessary, then press
EXIT.
If the television cannot be connected to a media re-
corder/decoder with a SCART lead or if a station on
another
system is required, a programme position can
be manually tuned in (see page 10).