Toshiba 19LV610U Flat Panel Television User Manual


 
Connections
19
Ampli er equipped with a
Digital audio input
To COAXIAL
type digital
audio input
75 Ω coaxial cable (not supplied)
Connecting to an ampli er equipped with a digital audio input
2 channel digital stereo
You can enjoy the dynamic sound of 2 channel digital stereo by connecting an ampli er equipped with a digital audio input and speaker
system (right and left front speakers).
Note: PCM audio is limited to DVD or CD playback.
Note:
DO NOT connect the COAXIAL DIGITAL AUDIO OUT jack of the TV/DVD to the AC-3 RF input of a Dolby Digital Receiver.
This input on your A/V Receiver is reserved for Laserdisc use only and is incompatible with the COAXIAL DIGITAL AUDIO OUT jack
of the TV/DVD.
Connect the COAXIAL DIGITAL AUDIO OUT jack of the TV/DVD to the “COAXIAL” input of a Receiver or Processor.
Refer to the ownerʼs manual of the connected equipment as well.
When you connect the TV/DVD to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet
before making any connections.
The output sound of the TV/DVD has a wide dynamic range. Be sure to adjust the receiverʼs volume to a moderate listening level.
Otherwise, the speakers and your hearing may be damaged by a sudden high volume sound.
Turn off the ampli er before you connect or disconnect the TV/DVDʼs power cord. If you leave the ampli erʼs power on, the speakers
may be damaged.
Back side
To COAXIAL DIGITAL
AUDIO OUT
HDMI - to - DVI adapter cable
(HDMI type A connector)
(not supplied)
Audio cord (not supplied)
HDMI cable (type A connector)
(not supplied)
To DVI output
To HDMI out
or
HDMI device
DVI device
To HDMI IN
To HDMI 1/PC
AUDIO IN
Connecting to an HDMI or a DVI device
Back side
Note:
You must select the corresponding audio input source (HDMI or DVI) on the menu screen (see ”Selecting the HDMI1 audio input
source” on page
42
). Otherwise you will only see the image with no sound.
When you connect the HDMI to a DVI device with a HDMI-to-DVI adapter cable, it only transfers the video signal, so it is necessary to
use separate analogue leads to transfer the audio signals.
The HDMI-2-connection has no analogue audio input. If you want to connect a DVI appliance to it, you will not hear a sound through
the TV loud speakers. If you want to hear the sound of a DVI appliance through the TV loud speakers then connect the DVI
appliance to HDMI-1. (26LV610U only)
About HDMI
HDMI (High De nition Multimedia Interface) supports both video
and audio on a single digital connection for use with DVD players,
DTV, set-top boxes, and other AV devices. HDMI was developed
to provide the technologies of High Bandwidth Digital Content
Protection (HDCP) as well as Digital Visual Interface (DVI) in one
speci cation. HDCP is used to protect digital content transmitted
and received by DVI-compliant or HDMI-compliant displays.
HDMI has the capability to support standard, enhanced, or high-
de nition video plus standard to multi-channel surround-sound
audio. HDMI features include uncompressed digital video, a
bandwidth of up to 2.2 gigabytes per second (with HDTV signals),
one connector (instead of several cables and connectors), and
communication between the AV source and AV devices such as
DTVs.
HDMI, the HDMI logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI licensing LLC.
52G0101A P14-29.indd 1952G0101A P14-29.indd 19 1/5/09 3:02:56 PM1/5/09 3:02:56 PM