Filter
Top Products
You can also use the CCSelectorto select digital
closed caption services (if available). When such
services are not available, the CCSelector presents a
default list of services.
To select closed captions:
1 Press u_u and open the Preferences menu.
2 Highlight CCSelectorand press @.
3 Press • or • to select Closed Caption, and then
press _ or _" to select the desired service.
EXIT
4 Press O"
Adjusting the audio
Muting the sound
Press _ on the remote control to partially reduce
(1/2 MUTE) or mrn off (MUTE) the sound. Each
time you press _, the mute mode will change in
the following order:
1/2 Mute _ Mute _ Volume
If the closed caption mode is set to Offwhen you
select "MUTE" mode, the closed caption feature is
automatically activated if the TV pro_am is Closed
Captioned. To mute the audio without automatically
activating the closed caption feature, use v__ to set
the volume to 0. See "Using the closed caption mode"
(r_ page 37) for more information on closed caption
modes.
Using the digital audio selector
You can use the Digital AudioSelector to
conveniently switch between audio tracks on a digital
channel (for those channels that have multiple audio
tracks). This temporarily overrides the audio track
chosen by the language option under Audio Setup (_,
"Selecting stereo/SAP broadcasts" on page 38).
To use the digital audio selector:
1 Press u_u and open the Sound menu.
2 Highlight Digital Audio Selector and press @.
3 Press • or • to select Audio,and then press _ or
_" to select the desired service.
4 Press E_T.
Selecting stereo/SAP broadcasts
The multi-channel TV sound (MTS) feature allows
you to output high-fidelity stereo sound. MTS also
can transmit a second audio program (SAP)
containing a second lan_mge, music, or other audio
information (when provided by individual stations).
When the TV receives a stereo or SAP broadcast, the
word "STEREO" or "SAP" appears on-screen when
is pressed.The MTS feature is only available
for analog signals on the ANT/CABLEinput.
To listen to stereo sound:
1
2
3
4
Press _a_uand open the Soundmenu.
Highlight AudioSetup and press @.
In the MTSfield, select Stereo.
To save the new settings, highlight Doneand press
0
To reset the settings to the factory defaults,
highlight Reset and press @.
Note:
° You can typically leave the TVin Stereo mode
because it will automatically output the type of
sound being broadcast (stereo or monaural).
* If the stereo sound is noisy, select Mono to
reduce the noise.
To listen to an alternate language on an
ATSC digital station (if available):
Highlight the Languagefield in step 3 above, and
then press _ or _" to select the language you prefer.
To listen to a second audio program on an
analog station (if available):
Select SAPin step 3 above.
38