Filter
Top Products
101
Setting up your TV
Using HDMITM CEC
Other HDMI
TM
CEC functions
When the Enable HDMI CEC Control and each item in the
HDMI CEC Control Setup menu are set to On, the following
functions will be enabled.
Item: Description:
TV Auto Power If a HDMI
TM
CEC device is turned on, the TV turns on automatically.
Auto Standby If the TV is turned off, the TV will send a message to turn off all of the HDMI
TM
CEC devices connected to the TV.
Amplifier
Control
If Amplifier Control is set to On, you can adjust the sound volume or turn off the
sound using the remote control.
Initial Speaker
Setting
From this item, you can set your audio output preference to the TV speakers
or the audio receiver speakers. When this item is set to Receiver, the TV
remote can be used to adjust or mute the volume of the audio. This item will
be grayed out when
Amplifier Control is set to Off.
When you turn on the Audio Receiver, change its input source or
adjust the sound volume, the sound will be output from the audio
receiver’s speakers even if TV Speakers has been selected. Turn the
TV off and on again to output the sound from the TV speakers.
Setting up HDMI
TM
CEC
To set the HDMI
TM
CEC Setup:
1 From the Options menu, highlight HDMI CEC Control
Setup and press the ENTER button.
2 Highlight Enable HDMI CEC Control, and then press the
ENTER button.
3 Select On, and then press the ENTER button.
If you select Enable HDMI CEC Off, the other items will be grayed out.
4 Press the /▼(arrow) buttons to highlight the HDMI
TM
CEC
Setup item you want to use, and press the ENTER button,
follow by /▼(arrow) buttons.
v TV Auto Power: On/Off
v Auto Standby: On/Off
v Amplier Control: On/Off
v Initial Speaker Setting : TV/Receiver
Using the HDMI
TM
settings feature