Filter
Top Products
18
Setting up
your TV
Adding and erasing channels manually
After you have automatically programmed the channels into the TV’s
memory, you can manually add and erase individual channels.
To add a channel to or erase a channel from the TV’s memory:
1. Tune the TV to the channel you want to add or erase. If you are
adding a channel, you will need to use the CHANNEL
NUMBERS to select the channel.
2. Press MENU.
3. Press
x or • to highlight the SET UP menu.
4. Press
y or z to highlight ADD/ERASE.
MOVE SELECT
[
]
[
]
LANGUAGE:
ANT1/2:
TV/CABLE:
CH PROGRAM
ADD/ERASE:
MORE
[ENGLISH]
FRANCAIS ESPANOL
[ANT1] ANT2
[TV] CABLE
[ADD] ERASE
SET UP
5. Press x or • to select ADD or ERASE, whichever function you
want to perform.
6. Press MENU.
7. Repeat steps 1–6 for other channels you want to add or erase,
or press EXIT to return to normal TV viewing.
Changing channels
To change to the next programmed channel:
Press CHANNEL
yz.
To change to a specific channel (programmed or unprogrammed):
Press the CHANNEL NUMBERS (0–9 and 100).
Note: For channels 100 and higher, press the 100 button, and
then the next two channel numbers (for example, to select
channel 100, press 100, 0, 0; to select channel 125, press
100, 2, 5).
Image tilt correction
When you install or change the direction of the TV, the picture may
become tilted (caused by the Earth’s magnetism). If this happens, use
the image tilt correction feature to obtain the best possible picture.
To adjust the image tilt:
1. Press MENU, and then press
x or • until the SET UP menu
appears.
2. Press
y or z to highlight TILT CORRECTION.
3. Press
x or • to adjust the picture tilt (from –10 to +10).
MOVE SELECT
[
]
[
]
SET UP
–
+
MORE
DEMO [START] STOP
IMAGE TILT +3
Menu
Channel
DEMO MENU TV/VIDEO VOLUME CHANNEL
POWER
CH RTN
ADV/
PIP CH
ADV/
PIP CH
LIGHT
MUTE TV/VIDEO TIMER
RECALL
POWER
TV
CABLE
VCR
ENT
ENTER
FAV
FAV
C.CAPT
EXIT
MENU
RESET
1
4
2
5
3
6
7
8
9
0
100
Channel
Numbers
MENU
CH
CH (Channel)
VOL
EXIT