Filter
Top Products
25
Reference
Welcome to
Toshiba
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
Appendix
Index
To unblock all blocked channels:
Note: This will unblock every channel you have blocked. You cannot
unblock individual channels.
1. Press MENU.
2. Press
x or • to highlight the SET UP menu.
3. Press
y or z to highlight V-CHIP CONTROL.
4. Press
x or • to display the Enter PIN Code screen.
5. Use the CHANNEL NUMBERS (0–9) to enter your four-digit
PIN code. After entering the code, the V-Chip Control menu
appears.
6. Press
y or z to highlight BLOCK CHANNEL.
7. Press
x or • to display the BLOCK CHANNEL menu.
SET/CLEAR will be highlighted.
8. Press
x or • to highlight CLEAR.
9. Press
z to clear all blocked channels from the list.
10. Press EXIT.
Locking video inputs
You can use the Video Lock feature to block the input sources
(Video 1, Video 2, Video 3, and ColorStream) and channels 3 and 4.
Note: The Video Lock feature is independent of the Enable Blocking
option of V-Chip control (page 21).
The Video Lock options are:
Video: Blocks Video 1, Video 2, Video 3, and ColorStream.
Video+: Blocks Video 1, Video 2, Video 3, ColorStream, and
channels 3 and 4.
Off: Disables the Video Lock feature.
To set up video lock:
1. Press MENU.
2. Press
x or • to highlight the SET UP menu.
3. Press
y or z to highlight V-CHIP CONTROL.
4. Press
x or • to display the Enter PIN Code screen.
5. Use the CHANNEL NUMBERS (0–9) to enter your four-digit
PIN code. After entering the code, the V-Chip Control menu
appears.
6. Press
y or z to highlight VIDEO LOCK.
7. Press
x or • to select the desired level of video locking (Video,
Video+, or Off).
MOVE
[
]
[
]
ENABLE BLOCKING [Y] N
SET RATING
SET BLOCKING OPTIONS
NEW PIN CODE
BLOCK CHANNEL
VIDEO LOCK VIDEO VIDEO+ [OFF]
SET UP
SELECT
8. Press EXIT.
CH RTN
ADV/
PIP CH
ADV/
PIP CH
LIGHT
MUTE TV/VIDEO TIMER
RECALL
POWER
TV
CABLE
VCR
ENT
ENTER
FAV
FAV
C.CAPT
EXIT
MENU
RESET
1
4
2
5
3
6
7
8
9
0
100
Channel
Numbers
MENU
CH
VOL
EXIT
Note:
In normal TV viewing, if you cannot access the
input sources (Video 1, Video 2, Video 3, and
ColorStream) or channels 3 and 4, check the
Video Lock setting and highlight OFF if
necessary.