Filter
Top Products
13
Presetting channel
• First, use the ASM (Automatic Search
Memory) function to preset all active
channels in your area automatically. Refer to
step 5 of “GETTING STARTED”, page 5.
Then, arrange the preset channels with the
SEARCH, SKIP and MFT (Manual Fine Tuning)
functions so that you can tune into only
desired channels.
• Use the SEARCH function if desired channels
cannot be preset with the ASM or if you would
like to preset channels to specific position
numbers one by one.
To use the SEARCH function
1 Press MENU and then ; -/+ to highlight
the “
TUNING” icon.
TUNING
MFT
AFT
ASM
SEARCH
POSITION
MEMORY
P001
ON
MENU
SELECT / MENU –/+ BACK
2 Press CH s/t to select “SEARCH”. Press
; -/+ to start searching. Pressing “–”
searches for channels at lower frequencies
while pressing “+” searches for channels at
higher frequencies. While searching,
pressing the opposite direction button, + and
- respectively, will cancel SEARCH function.
SEARCH VHF H P001
STOP
TUNING
MFT
AFT
ASM
SEARCH
POSITION
MEMORY
P001
ON
MENU
SELECT / ADJUST –/+ BACK
Repeat this process until you can get the
desired channel.
3 When the desired channel is shown, press
CH t to select “POSITION”. Press ;
-/+
repeatedly until the position number to be
preset is shown.
TUNING
MFT
AFT
ASM
SEARCH
POSITION
MEMORY
P002
OFF
MENU
SELECT / ADJUST –/+ BACK
4 Press CH s/t to select “MEMORY”, then
press ;
+ to memorize the channel at the
current position.
MFT
AFT
ASM
SEARCH
POSITION
MEMORY
P002
OFF
MENU
SELECT / ADJUST –/+ BACK
TUNING
5 When you program other channels, repeat
steps 2 to 4.
To skip a position number
After presetting the channels, you may skip
unnecessary position numbers so that only
the channels you want to watch are selected
using CH s/t.
1 First, select the position number to be
skipped with CH s/t or digit selection and
number buttons (-/--, 0~9).
2 Highlight the “
SET UP” icon and press
CH s/t to select “SKIP”.
SETUP
LANGUAGE
COLOR MODE
SOUND MODE
SKIP
BLUE SCREEN
TEXT
ON
FAST
AUTO
ON
B/G
ENGLISH
MENU
SELECT / ADJUST –/+ BACK
3 Press ;
-/+ to set “SKIP” to “ON”. This
completes the setting for skipping the
selected position number.
CHANNEL PRESET
EN-01-20[29CZ5DE/29CZ6DA/TES]-1 23/9/05, 9:27 AM13