Filter
Top Products
27
Connecting your TV
• This TV is only operable with L-PCM on
32/44.1/48 kHz and 16/20/24 bits. If there is
no sound when using HDMI, use the analogue
audio cables to connect the TV and the HDMI
device, and select Analogue in HDMI audio of
the AV connection menu (- page 28).
• This TV is able to connect with HDMI devices.
But it is possible that some HDMI devices may
not operate properly with this TV.
Connecting an HDMI and a DVI device
The HDMI input on your TV receives digital audio
and uncompressed digital video from an HDMI
device and uncompressed digital video from
a DVI device. This input is designed to accept
HDCP programme material in digital from CEA-
861-D compliant consumer electronic devices
(such as a set top box and DVD player with
HDMI and DVI output).
The HDMI input is designed for best performance
with 1080i (50 Hz/60 Hz) and 1080p (50 Hz/60
Hz) high-defi nition video signals, but will also
accept and display 480i, 480p, 576i, 576p, 720p
(50 Hz/60 Hz) and VGA signals.
• HDMI: High-Defi nition Multimedia Interface
• DVI: Digital Video Interface
• HDCP: High-bandwidth Digital Content
Protection
• CEA-861-D compliance covers the
transmission of uncompressed digital video
with high-bandwidth digital content protection,
which is being standardized for reception of
high-defi nition video signals. Because this is
an evolving technology, it is possible that some
devices may not operate properly with the TV.
• E-EDID: Enhanced-Extended Display
Identifi cation
• Acceptable PC signal format:
S-VGA: VESA 800 5 600 @ 60 Hz
XGA: VESA 1024 5 768 @ 60 Hz
W-XGA: VESA 1280 5 768 @ 60 Hz
W-XGA: VESA 1360 5 768 @ 60 Hz
S-XGA: VESA 1280 5 1024 @ 60 Hz
• L-PCM: Linear-Pulse Code Modulation
Note:
HDMI, the HDMI logo, and High-Defi nition
Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing, LLC.
Connecting an HDMI device
One HDMI cable (type A connector)
VIDEO AUDIO
LR
IN
OUT
HDMI OUT
TV back view
HDMI device
For proper operation, it is recommended that you
use a short HDMI cable.
HDMI cable transfers both video and audio.
Connecting a DVI device
One HDMI (type A connector)-to-DVI adapter
cable and audio cables
VIDEO AUDIO
LR
IN
OUT
DVI
OUT
TV back view
DVI device
TV back view
HDMI (type A connector)-to-DVI adapter cable
For proper operation, the length of an HDMI-to-
DVI adapter cable should not exceed 3m. The
recommended length is 2m.
Standard analogue audio cables
An HDMI-to-DVI adapter cable transfers only
video. Separate analogue audio cables are
required.
323742AV550ETY_EN.indd 27323742AV550ETY_EN.indd 27 3/19/2009 11:06:19 AM3/19/2009 11:06:19 AM