Filter
Top Products
Introduction
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
Appendix
Index
42
(E) 32HFX72 36HFX72
Saving new preference
You can save the PICTURE qualities (contrast, brightness, color, tint,
and sharpness) you adjusted in the picture preference mode.
To save your new preferences:
1. Press MENU, and then press x or • until the PICTURE menu
appears.
2. Press y or z to highlight SAVE NEW PREFERENCE.
3. Press x or •. When complete, the menu displays “DONE.”
P CTURE ANTENNAI
MODE PREFERENCE
PREFERENCE DONE
FLESH
SVM H I GH
TONE OFF
OFF
MEDIUM
SAVE NEW
COLOR
TEMPERATURE
CableClear
DNR
The mode automatically change to PREFERENCE (see “Selecting the
picture mode” on page 41).
You can choose your saved preferences any time by selecting
PREFERENCE in the PICUTRE menu (see “Selecting the picture
mode” on page 41).
Using the flesh tone feature
This feature displays natural flesh tones by correcting the tint.
To turn on the flesh tone feature:
1. Press MENU, and then press x or • until the PICTURE menu
appears.
2. Press y or z to highlight FLESH TONE.
3. Press x or • to highlight ON.
P CTURE ANTENNAI
MODE PREFERENCE
PREFERENCE
FLESH TONE ON
OFF
MEDIUM
OFF/
SAVE NEW
COLOR
TEMPERATURE
SVM H I GH
CableClear
DNR
Using the CableClear™ DNR (digital noise reduction)
feature
This feature allows you to reduce visible interference in your TV
picture. This is useful when receiving a broadcast with a weak signal
(especially Cable channel) or playing back a video cassette or disc
damaged by repeated use.
To turn on the CableClear
™
DNR feature:
1. Press MENU, and then press x or • until the PICTURE menu
appears.
2. Press y or z to highlight
CableClear DNR.
3. Press x or • to highlight AUTO.
To turn off the CableClear DNR
™
feature:
Highlight OFF in step 3 above.
MENU
yzx •
Note:
The “CableClear DNR” display will change to
“DNR” in video mode.
P CTURE ANTENNAI
MODE
FLESH TONE ON
OFFAUTO
MEDIUM
/
COLOR
TEMPERATURE
PREFERENCE
SVM H I GH
PREFERENCE
SAVE NEW
CableClear
DNR