Filter
Top Products
60
HL17 (E/F) Web 213:276
Chapter 8: Troubleshooting
LED indications
The green and yellow LED lights on the TV front indicate the TV’s status, as described below.
Note: If the TV loses A/C power (e.g., a power outage occurs or the power cord is unplugged), when power is restored, the yellow
LED will blink while the TV is booting until the remote control is usable. This is normal and is not a sign of malfunction.
If, after trying the solutions, the problem still exists:
• In the U.S., call TACP Consumer Solutions at 1-800-575-5469.
• In Canada, locate the nearest Toshiba authorized service depot by directing your web browser to www.toshiba.ca; click
“Home Entertainment,” and then click “Support.”
LED Indication Condition Solution
1) Green is ON (solid). The TV is operating properly. –
2) Yellow is ON (solid).
Standby with Power-On Mode set to Fast.
See “Selecting the Power-On Mode”
(- page 34).
3) Yellow blinks three
times.
TV is powering up. Wait several seconds until the yellow LED stops
blinking.
4) Green blinks slowly. Abnormal operation of BUS line. Turn OFF the TV and unplug the power cord.
Plug the power cord in again and turn ON the TV.
5) Green blinks
quickly.
Power protect detection.
TV front
Yellow LED Green LED
POWER
32HL17_EN.book Page 60 Tuesday, April 24, 2007 11:06 AM