Filter
Top Products
79
Setting up your TV
Locking channels
v Set the Input Lock to Off, see “Using the input lock feature” on
page 77
v A message appears when 10 minutes, 3 minutes, and 1 minute
are remaining.
v If the TV loses power with time remaining, the TV will enter Input
Lock mode when power is restored (as if the GameTimer
TM
had
been activated). To resume use, you must deactivate the Input
Lock, see “Using the input lock feature” on page 77
Using the panel lock feature
You can lock the control panel to prevent your settings from being
changed accidentally (by children, for example). When Panel Lock
is set to On, none of the controls on the control panel operate except
the POWER button.
To lock the control panel:
1 In the Options menu, highlight Panel Lock, and then press the
ENTER button.
2 Enter your four-digit PIN code.
3 Press the ▼(arrow) button to select On.
When the control panel is locked and any button on the control
panel (except the POWER button) is pressed, the message “NOT
AVAILABLE” appears.
(Sample Illustration) Locks menu - Panel Lock selection
To unlock the control panel, select Off in Step 3 in this section or
press and hold the VOLUME (–) button on the TV control panel for
approximately 15 seconds until the volume icon appears.