Filter
Top Products
Chapter 6: Using the TV’s features
49
Note:
•
A message will appear when 10 minutes,
3 minutes, and 1 minute remain on the
GameTimer.
•
If the TV loses power with time remaining on the
GameTimer, when power is restored the TV will
enter Input Lock mode (as if the GameTimer
had been activated) and you will have to
deactivate the Input Lock (as described
before).
Using the control panel lock feature
You can lock the control panel to prevent your
settings from being changed accidentally (by
children, for example). When the control panel lock
is On, none of the controls on the TV control panel
will operate except POWER.
To lock the control panel:
1無
Press and highlight the Locks menu icon.
2無
Press q to display the PIN code entering screen.
3無
Enter your four-digit PIN code and press .
4無
Press q to highlight Control Panel Lock.
5無
Press u and p or q to highlight On and press
. When the control panel is locked and any
button on the control panel (except POWER)
is pressed, the message “NOT AVAILABLE”
appears.
To unlock the control panel:
Highlight Off in step 5 above, or press and hold the
VOLUME – button on the TV control panel for about
10 seconds until the volume icon appears.
Using the PC settings feature
You can view an image from a PC on the TV screen.
When a PC is connected to the TV's PC IN
terminal, you can use the PC Settings feature to
make adjustments to the image. If the edges of the
picture are cut off, readjust the Horizontal Position
and Vertical Position. If the picture is affected by
interference, readjust the Clock Phase and Sampling
Clock.
To adjust the PC settings:
1無
Repeatedly press to select PC input mode
( “Selecting the video input source to view”
page 34).
2無
Press and open the Setup menu.
3無
Highlight PC Settings and press .
Installation
PC Settings
Note: If a PC is not connected or there is no
pc input signal, this feature will be grayed
out in the Setup menu.
4無
Press p or q to highlight the item you want to
adjust.
5無
Press t or u to make the appropriate
adjustments.
Note: The screen is disrupted momentarily
when adjusting the PC settings. This is not a
sign of malfunction.
Mode Description
Horizontal
Position
Moves the picture left/right.
The adjustment range is within ±50 from
center.*
Vertical
Position
Moves the picture up/down.
The adjustment range is within ±10 from
center.*
Clock
Phase
Helps to reduce noise and sharpen the
picture.
The adjustment range is within ±16 from
center.*
(continued)