Filter
Top Products
English - 13 -
Auto Tuning
As new services are broadcast, it will be necessary to
re-tune the television in order to view them.
Auto Tuning will completely re-tune the television
and can be used to update the channel list. It is
recommended that Auto Tuning is run periodically to
ensure that all new services are added. All current
channels and settings, i.e. locked channels, will be
lost.
Select the • SETUP from the main menu by using
Up or Down buttons. Press OK and Setup menu
will be displayed.
Select the • Installation from the Setup menu
by using Up or Down buttons. Press OK and
Installation menu will be displayed.
Select• Automatic Channel Scan from the Installation
menu by using Up or Down buttons and press OK.
A screen will appear warning that previous digital
programmes and settings will be deleted. Select Yes
and press OK to continue with the Auto tuning.
The television will start to search for all available •
stations.You must allow the television to complete
the search. When the search is complete the Auto
tuning screen will display the total number of
services found.
After search is completed for digital channels, a •
message asking whether to search for analogue
channels appears on the screen:
Press the • OK button to search for analogue
channels. The following menu appears on the screen
for analogue channel search:
Select your • Country , Language and Text language
by using “ ” or “ ” and “ ” or “ ” buttons. Press
“OK” or RED button to continue. To cancel, press
BLUE button. The following menu will be displayed
during the automatic tuning:
After APS is fi nalized, the programme table will •
appear on the screen. In the programme table
you will see the programme numbers and names
assigned to the programmes.
Auto Tuning
00_MB35_[GB]_3910UK_IDTV_NICKEL1_37847W_(IB_INTERNET)_10071349.indd 1300_MB35_[GB]_3910UK_IDTV_NICKEL1_37847W_(IB_INTERNET)_10071349.indd 13 02.12.2010 11:03:0802.12.2010 11:03:08