Filter
Top Products
Introduction
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
Appendix
Index
31
Adjusting the height of the Theater Wide picture
1. Press PIC SIZE to select the Theater Wide mode.
2. Press MENU, and then press x or • until the THEATER menu
appears.
3. Press y or z to highlight THEATER WIDE SIZE.
SELECT:
THEATER
SURROUND
THEATER WIDE SIZE
SRS
END:EXIT
PICTURE SCROLL
4. Press x or •, then press y or z to select the appropriate picture
height from the following three Theater Wide modes.
THEATER WIDE 1
THEATER WIDE 2
THEATER WIDE 3
yz: TO SELECT
>
>
>
Normal picture size Theater Wide 1
Theater Wide 2
Theater Wide 3
PIC SIZE
MENU
yzx •
Theater Wide 1 (recommended mode):
• The picture is non-uniformly enlarged—the center of the picture
remains close to its true proportion, but the left and right edges are
stretched wider to fill the screen.
• None of the picture is hidden.
Theater Wide 2:
• The entire picture is uniformly enlarged—it is stretched the same
amount both wider and taller (retains its true proportion).
• Part of the picture at the top and bottom is hidden. To view the
hidden areas, see “Scrolling the Theater Wide picture” on page 32.
Theater Wide 3:
• The picture is non-uniformly enlarged—it is stretched wider to fill
the width of the screen, but only slightly stretched taller.
• A small part of the picture at the top and bottom is hidden. To view
the hidden areas, see “Scrolling the Theater Wide picture” on page 32.