Filter
Top Products
88
Using the TV’s features
Adjusting the audio
When you use ColorStream
®
HD or Video, switch the AV input
mode as appropriate.
32L2200U and 40L2200U models do not support Audyssey
Dynamic Volume
®
.
Stable Sound (32L2200U/40L2200U only)
The Stable Sound feature limits high volume levels and prevents the
extreme changes in volume that can occur when channels are
changed or a program switches to a commercial.
To turn on Stable Sound:
1 Press the MENU button and open the Sound menu.
2 Highlight Audio Settings, and then press the ENTER button.
3 Press the ( / arrow) buttons to highlight the Stable Sound
field.
4 Press the ( / arrow) buttons to select On.
Selecting the optical audio output format
You can select the optical audio output format when you connect a
Dolby
®
Digital decoder or other digital audio systems to the TV’s
Optical Audio Out terminal (see “Connecting a digital audio
system” on page 33).
To select the optical audio output format:
1 Press the MENU button, and then open the Sound menu.
2 Highlight Audio Setup, and then press the ENTER button.
3 In the Dolby Digital Output Format field, select either Dolby
Digital or PCM, depending on your device.
4 To save the new settings, highlight Done, and then press the
ENTER button.
To reset the settings to the factory defaults, highlight Reset,
and then press the ENTER button.
NOTE