Toshiba 42H81 Flat Panel Television User Manual


 
Introduction
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
Appendix
Index
29
123
456
789
ENT
100
0
CH
VOL
POWER
TIMER
RECALL
TV/VIDEO
MUTE
CTV
CABLE
VCR
CH RTN
PIC SIZE
EXIT
LIGHT
STOP SOURCE
ADV/
POP CH
ADV/
POP CH
FAV
FAV
PLAY POP
REC TV/VCR REW FF
STILL SWAP
FAVORITE
MENU/
C.CAPT
ENTER
SOURCE
Using the POP double-window feature
The POP (picture-out-picture) feature splits the screen into a double
window that allows you to watch two programs at the same time. The
POP program can come from a TV broadcast or an external source,
such as a VCR.
To display a TV broadcast in the POP window:
1. Press POP to display the POP window.
POP
12
2. Press POP CH yz to change the channel of the POP window.
If the V-CHIP feature is active and you try to watch a TV
program that exceeds the set rating limits, the program will be
blocked (see “Using the V-CHIP menu” on page 32).
POP
BLOCKED
24
To display a picture from an external source in the POP window:
1. Connect the external source equipment (see “Connecting your
TV” on page 5).
2. Select the TV program you want to watch in the main window.
3. Press POP to display the POP window.
4. Repeatedly press SOURCE to select the input source for the POP
window (VIDEO 1, VIDEO 2, or VIDEO 3 only; you cannot
select ColorStream in POP mode). The current source will
display in purple.
5. You can play a tape as the POP picture, or select a channel for the
POP window using the VCR’s channel keys.
1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
2345678910111213141516171819
20 21 22 23 24 25 26 27 28 29 30 31 32 33 3435
12345678910111213141516171819
20 21 22 23 24 25 26 27 28 29 30 31 32 33 3435
POP SOURCE SELECT I ON
TV
1
VIDEO
VIDEO
2
VIDEO 3
SOURCE :TO SELECT
To close the POP window:
Press POP again.
POP windowMain window
Note:
•The POP buttons on the remote control
operate the TV’s POP features.
•You cannot access POP features when
viewing ColorStream HD1 or HD2 input.
•You cannot display the ANT-2 signal source
in the POP window.
•You can choose to hear the sound of either
the main or POP program (see “Selecting
the Audio OUT sound” on page 47).
POP
POP CH yz