Filter
Top Products
25
Introduction
Connecting your TV
Setting up your TV
Using the TV’s Features
Appendix
Using the TV’s features
Adjusting the channel settings
Switching between two channels
You can switch between two channels without entering an actual
channel number each time.
To switch between two channels:
1. Press TV to select the TV mode.
2. Select the first channel you want to view.
3. Select a second channel using the Channel Number buttons (0-9,
100).
4. Press CH RTN. The previous channel will be displayed.
Each time you press CH RTN, the TV will switch back and forth
between the two channels. The CH RTN feature is available for the
video input sources also.
Programming your favorite channels
You can preset up to 12 of your favorite channels using the Favorite
Channel Programming feature. Because this feature scans through
only your favorite channels, it allows you to skip other channels you
do not normally watch.
You can still use Channel
/ to scan through all the channels you
programmed in the TV’s memory or the Channel Numbers to directly
tune a channel.
To program your favorite channels:
1. Press TV to select the TV mode.
2. Select a channel you want to program.
3. Press MENU, then press
or to display the OPTION menu.
4. Press ▲ or ▼ to highlight FAVORITE CH.
5. Press
to display the FAVORITE CH
menu. SET/CLEAR will be
highlighted.
6. Press
or to highlight SET and
press ENTER.
7. Press EXIT to return to normal
viewing.
8. Repeat steps 1-7 for up to 12
channel.
To select your favorite channels:
Press the FAV ▲ / ▼ buttons on the
remote control to select your favorite channels.
The FAV ▲ / ▼ buttons will not work until you have programmed
one of more favorite channels.
To clear your favorite channels:
1. Press TV to select the TV mode.
2. Select a channel you want to clear from the favorite channel memory.
3. Press MENU, then press or to display the OPTION menu.
4. Press ▲ or ▼ to highlight FAVORITE CH.
5. Press
to display the FAVORITE CH menu. SET/CLEAR will be
highlighted.
6. Press or to highlight CLEAR.
7. Press ENTER until “0” replaces the
channel number you want to erase.
8. Press EXIT to return to normal
viewing.
9. Repeat steps 1-8 for the other
channels.
INPUT DISPLAY
Menu/Enter
Exit
Channel
Numbers
FAV
Channel
/
CH RTN
Note:
If the remote control does not operate your TV,
press the “TV” button on the remote control
and try again.
TV
FAVORITE CH : CH 002
SET / CLEAR TV CABLE
SETUP CH 0 0 0
0 000
0 000
RETURN
SELECT ADJUST
ENTER:CLEAR
002
OPTION
ON TIMER OFF
FAVORITE CH
CH LABEL
VIDEO LABEL
SELECT ADJUST
FAVORITE CH : CH 002
SET / CLEAR TV CABLE
SETUP CH 0 0 0 0
0 000
0 000
RETURN
SELECT ADJUST
ENTER:SET
Using the TV’s Features
30A0121A_En_p18-25 5/26/06, 9:38 PM25