Filter
Top Products
19
SPECIAL SOUND FEATURES
Press the
M
button to bring up the Surround
menu. With Dolby Pro Logic selected, EXIT
and go to the Feature menu to select the
Surround test from the Surround set up
menu.
Use the
S
and
R
buttons to adjust.
1
2
3
Inserting the headphone jack will mute the sound from all
speakers and deliver a normal stereo left and right signal.
There are no Dolby Digital or Surround effects available when
using headphones.
From the Feature menu select Surround set
up
.
Using the
S
or
R
buttons turn Rear speaker to
YES.
Sit in your usual viewing position.
Dolby Pro Logic – available on many TV broadcasts in addition to video tapes, uses a combination of
4 speaker channels – front-left, centre, front-right and two rear. If external front speakers are not connected,
the left and right front channels will be delivered through the speakers in the TV and you will not hear a
centre channel.
1
2
The test will play a ‘white noise’ through
each speaker in turn. The display will show
you which speaker is in play, adjustments
may be made whilst it is highlighted. The
Centre
channel will only be adjustable once
the external switch has been set to
EXT
.
EXIT : To exit
Left
Centre
Right
Rear right
Rear left
▼
▼
61
▼
▼
61
▼
▼
51
!
☛
EXIT : To exit
Surround set up
▼
▼
▼
▼
▼
Back
Rear speaker YES
Surround test
Delay time
Remember… Check that
Rear speakers are
connected and the
Rear speaker option in the
Surround set up menu is set to YES.
!
Dolby Pro Logic
Surround Test Mode
YES in the Rear
speaker option must
be chosen for the Test
Mode below to function…
!
Surround test
If you cannot connect rear speakers try
selecting Dolby 3 Stereo in Step 2, but you
must have external front speakers connected
and the external switch set to EXT.
!