Filter
Top Products
Introduction
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
Appendix
Index
17
(E) 46HM84, 52HM84, 62HM84
Using the remote control
Preparing the remote control for use
Your TV remote control can operate your TV and many cable
converter boxes, satellite receivers, VCRs, DVD players, and HTIBs
(home theater in a box), even if they are different brands.
If you have a Toshiba device:
Your TV remote control is preprogrammed to operate most Toshiba
devices. See page 20.
If you have a non-Toshiba device or a Toshiba device
that the remote control is not preprogrammed to
operate:
You can program the TV remote control so it will operate the other
device. See pages 18–20.
Installing the remote control batteries
1. Remove the battery cover from the back of the remote control.
2. Install two “AA” size batteries, making sure to match the + and –
signs on the batteries to the signs on the battery compartment.
3. Reinsert the battery cover in the remote control until the tab
snaps.
Remote control effective range
For optimum performance, aim the remote control directly at the TV
and be sure there is no obstruction between the remote control and
the TV.
Note:
• If your Toshiba TV remote control does not
operate all the features of your other
device, use the original remote control for
that device.
• Dispose of batteries in a designated
disposal area.
• Attention should be drawn to the
environmental aspects of battery disposal.
• If the remote control does not operate
correctly, or if the operating range becomes
reduced, replace both batteries with new
ones.
• If the batteries are dead or if you will not
use the remote control for a long time,
remove the batteries to prevent battery acid
from leaking into the battery compartment.
Squeeze tab and
lift cover.
Caution:
• Do not mix battery types or combine used
batteries with new ones.
• Do not throw batteries into a fire.
#01E17-21_46,52,62HM84 5/31/04, 12:20 PM17
Black