Filter
Top Products
Introduction
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
Appendix
Index
25
(E) 46HM84, 52HM84, 62HM84
MENUVOLUMECHANNELEXITTV/VIDEO
123
456
7
89
ENT
100
0
POWER
RECALL
CHRTN
FAV
FAV
TV
/
VIDEO
+10
PIC SIZE
EXIT
INFO
STOP
POP DIRECT CH MUTE SLEEP
TV/VCR PAUSE
FFREW
SKIP
/
SEARCH
SPLIT
SWAP POP CH
LIGHT
REC
CH SCAN
FREEZE SOURCE
PLAY
TV
CBL/SAT
VCR
DVD
VOLCH
FAVORITE
ENTER
DVDMENU
MENU
T
O
P
M
E
N
U
G
U
I
D
E
C
L
E
A
R
E
N
T
E
R
MENU
yzx •
MENU
x •zy
Adding and erasing channels manually
After you have programmed the channels automatically, you can
manually add or erase specific channels.
To add or erase channels:
1. Select the channel you want to add or erase. If you are adding a
channel, you must select the channel using the Channel Number
buttons.
2. Press MENU, and then press x or • until the SET UP menu
appears.
3. Press y or z to highlight ADD/ERASE, and then press ENTER
to display the pull-down menu.
LANGUAGE
SET UP
CLOCK SET
ADD
ERASE
ANT 1 / 2
TV / CABLE
CH PROGRAM
ADD / ERASE
SELECT::SETENTER
4. Press y or z to select ADD or ERASE, depending on the
function you want to perform.
5. Repeat steps 1-4 for other channels you want to add or erase.
Changing channels
To change to a specific channel (programmed or unprogrammed):
Press the Channel Number buttons (0–9 and 100).
For channels 100 and higher, press the 100 button, and then the
next two numbers. For example, to select channel 125, press 100,
2, 5.
To change to the next programmed channel:
Press Channel y or z on the TV or remote control.
Selecting the Quick Restart
With the Quick Restart feature set to ON, the TV stays in standby
mode for several minutes after the TV is turned off.
If the TV is turned on from standby mode, the full picture appears
immediately.
1. Press MENU, and then press x or • until the CUSTOM menu
appears.
2. Press y or z to highlight QUICK RESTART, and then press
ENTER.
3. Press y or z to select ON or OFF, and then press ENTER.
ON
OFF
SELECT::SETENTER
ON T I MER
CUSTOM
SLEEP T I MER
CC
FAVOR I TE CH
CH LABEL I NG
V I DEO LABEL
BACKGROUND
QU I CK RESTART
Channel yz
ENTER
Channel
Number
Note:
If Quick Restart is set to OFF and you turn off
the TV, it can take up to several seconds for
the picture to appear when you turn on the
TV again.
If Quick Restart is set to ON and you turn off
the TV, the following will occur for a few
minutes:
• The screen (lamp) lights dimly.
• The fans continue to run.
This is a function of the Quick Restart feature
(standby mode) and is not a TV malfunction.
If you do not prefer this, set the Quick Restart
feature to OFF.
When in the Quick Restart OFF mode, if you
continue to switch the TV ON and OFF in a
short time, the useful service life for the lamp
may be shorter than the average useful
service life.
See “Appendix” on page 56.
Control touchpad on TV front
#01E22-25_46,52,62HM84 5/31/04, 12:20 PM25
Black