Filter
Top Products
Introduction
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
Appendix
Index
17
Using the remote control
Preparing the remote control for use
Your Toshiba TV remote control has one dedicated TV mode and five
multi-brand modes: VCR, Cable/SAT, DVD, Audio1, and Audio2.
The target devices and default devices being programmed for each
mode are as follows:
Target device/Mode mapping
Mode Device
TV Toshiba TV
CABLE/SAT Multi-brand Cable, Satellite
VCRMulti-brand VCR, DVD, LD, Cassette
DVDMulti-brand DVD, VCR, LD, Cassette
AUDIO1 Multi-brand Audio: Amp., Tuner, Misc.Audio, CD/MD
AUDIO2 Multi-brand Audio: CD/MD, Amp., Tuner, Misc. Audio
Default device codes
Mode Default device
TV Toshiba TV
CABLE/SAT Toshiba Satellite receiver
VCRToshiba VCR
DVDToshiba DVD
AUDIO1 Pioneer Audio receiver
AUDIO2 Pioneer LD
Repeatedly press MODE to cycle among the modes. If you own
different brands of audio/video devices, you must first program your
remote control (see “Programming the remote control for use with
your audio/video devices” on page 20).
Installing the remote control batteries
To install the batteries:
1. Slide the battery cover off the back of the remote control.
2. Install two “AA” size alkaline batteries. Match the + and – signs
on the batteries to the signs on the battery compartment.
3. Slide the battery cover back on to the remote control until the
lock snaps.
TV
CABLE/SAT
VCR
DVD
AUDIO1
AUDIO2
123
456
789
100/
0
ENT
POWER
+10
ACTION
MODE
PIC SIZE
MENU
LIGHT SLEEP
ENTER
FAV
CH
VOL
EXIT
CH RTN
DVD RTN
DVD CLEAR
SLOW/DIR
SKIP/SEARCH
INPUT
RECALL
MUTE
L
I
N
K
T
H
E
A
T
E
R
F
A
V
O
R
I
T
E
I
N
F
O
G
U
I
D
E
S
E
T
U
P
T
I
T
L
E
S
U
B
T
I
T
L
E
A
U
D
I
O
FAV
Note:
Although your new TV’s remote control
includes codes for many devices, it may not
include codes for some or all of the features
on certain devices you wish to control. If you
are unable to program the TV’s remote
control to operate your device or some of the
features on that device, use the device’s
remote control or the controls on the device.
Caution:
• Dispose of batteries in a designated
disposal area.Do not throw batteries into a
fire.
• Do not mix battery types or combine used
batteries with new ones.
• If the remote control does not operate
correctly, or if the operating range becomes
reduced, replace both batteries with new
ones.
• If the batteries are dead or if you will not
use the remote control for a long time,
remove the batteries to prevent battery acid
from leaking into the battery compartment.
MODE