Toshiba 50L5200U Flat Panel Television User Manual


 
85
Using the TV’s features
Adjusting the audio
2 Highlight Digital Audio Selector, and then press the ENTER
button.
(Sample Image) Sound menu - Digital Audio Selector selection
3 Press the ( / arrow) buttons to select Audio, and then press
the ( / arrow) buttons to select the desired service.
4 Press the EXIT button.
Selecting stereo/SAP broadcasts
The multi-channel TV sound (MTS) feature allows you to output
high-fidelity stereo sound. MTS also can transmit a second audio
program (SAP) containing a second language, music or other audio
information (when provided by individual stations).
When the TV receives a stereo or SAP broadcast, an icon or word
“SAP” appears when the INFO button is pressed. The MTS feature
is only available for analog signals on the ANT/CABLE input.
To listen in stereo sound:
1 Press the MENU button and open the Sound menu.
2 Highlight Audio Setup, and then press the ENTER button.
3 In the MTS field, select Stereo.
4 To save the new settings, highlight Done, and then press the
ENTER button.
To reset the settings to the factory defaults, highlight Reset,
and then press the ENTER button.
You can typically leave the TV in Stereo mode because it outputs
the type of sound being broadcast (stereo or monaural).
If the sound is noisy, select Mono to reduce the noise.
NOTE