Filter
Top Products
13
Getting started
Turning the TV on
Switching on the TV
Connect the power cord to a wall outlet. The
!
power
indicator light should be red (standby mode).
1
Press on the remote control or
!
on the TV right
side panel. The
!
power indicator lights in green.
Note:
If you watch black and white programmes when the
Colour System
mode is set to Auto, colour noise
may appear on the screen. In this case select the
appropriate
Colour System
(For the system of each
country or region, refer to page 15).
Switching off the TV
1
Press on the remote control or
!
on the TV right
side panel to switch to the standby mode.
Notes:
• The TV is not fully disconnected from the main
supply, as minute current is consumed even when
!
is turned off. When the TV will not be used for
a long period of time, such as during vacation or
travel, remove the power plug from the wall outlet.
• The TV will automatically turn itself off after
approximately 15 minutes if it is tuned to a vacant
channel or a station that completes its broadcast
for the day. This function does not work for external
inputs or if Blue Screen mode is set to ‘Off’.
• If power is cut off while you are viewing the TV,
the Last Mode Memory function turns on the TV
automatically when power is applied again. If
power is going to be off for a long time and you are
going to be away from your TV, unplug the power
cord to prevent the TV from turning on in your
absence.
Tuning the TV for the first time
Before switching on the TV, put your decoder and media
recorder to
Standby
, if they are connected, and ensure
that the aerial is connected. To setup the TV, use the
buttons on the remote control as detailed on page 11.
1
Press the button. The
Quick Setup
screen will
appear.Thisscreenwillappearthersttimethatthe
TV is switched on and each time “
Reset TV
” (
-
page 27) is executed.
Quick Setup
Time Zone New South Wales
Menu Language English
2
Press
v
or
w
to select the menu language
English
or
Français
.
3
Press
s
to select
Time Zone
, and then press
v
or
w
to select the item you want to set. (New South Wales,
Northern Territory, Queensland, South Australia,
Tasmania, Victoria, Western Australia or Australian
Capital Territory)
4
Press
Q
, to display the
Location
menu (
-
page
17).
Location
Home
To use the TV for displaying in a store showroom, please
select [Store]. [Home] mode is recommended for normal
use.
5
Press
v
or
w
to select
Home
or
Store
. For normal
home use, select
Home
.
6
Press
Q
to display the
Auto Tuning
startup screen.
Use
v
or
w
to select
DTV
and
ATV
,
DTV
or
ATV
.
Then, press
s
to select
Start Scan
, and then press
Q
. You must allow the TV to complete the search.
Auto Tuning
Progress Found
ATV Tune Waiting...
Channel: 10
DTV Tune 3% 2
When the search is complete, the TV will
automatically select position one.
The
Auto Tuning
results screen will display the
services that are found.
Pos. Name Ch.Type
35
DTV
DTV Services Found :77 ATV Services Found: 12
ATV
Auto Tuning
1
24
6
24
9
35
10
24
11
35
12
32
21
7
Press
v
or
w
to view the
DTV
(digital channel) or
ATV
(analogue channel) lists.
Pos. Name Ch.
31
4
6
9
10
8
DTV
DTV Services Found :77 ATV Services Found: 12
ATV
Auto Tuning
0
2
1
2
3
4
5
6
8
Use
s
or
r
to move through the list to select a
channel, and then press
Q
to view.