Filter
Top Products
Introduction
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
Appendix
Index
23
53AX61(E)
Adding channels to the TV’s memory
When you press Channel yz, the TV will cycle through only the
channels stored in the TV’s channel memory. Use the steps below and
on the next page to program channels into the TV’s memory.
Programming channels automatically
The TV can automatically detect all active channels in your area and
store them in its memory. After the TV has automatically stored all
active channels, you can manually add or erase individual channels. If
you use both ANT-1 and ANT-2 terminals, you must program
channels for each input source.
To automatically program channels into the TV’s memory:
1. Press MENU, and then press x or • until the SET UP menu
appears.
2. Press y or z until TV/CABLE is highlighted.
3. Press x or • to highlight TV (if you use an antenna) or CABLE
(if you use cable).
1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
2 3 4 5 6 7 8 9 10 1112 1314 151617 1819
20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
12345678910111213141516171819
20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
SET UP
LANGUAGE
CLOCK
ANT
ADD ADDERASE/
TV
CH
PROGRAM
TV/CABLE/CABLE
1 ANT1/2
SET
ENGL SHI
4. Press y or z to select CH PROGRAM.
1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
2 3 4 5 6 7 8 9 10 1112 1314 151617 1819
20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
12345678910111213141516171819
20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
SET UP
LANGUAGE
CLOCK
ANT
ADD ADDERASE/
TV
CH
PROGRAM
CABLE/CABLE
1 ANT1/2
SET
ENGL SHI
5. Press x or • to start automatic channel programming. The TV
automatically cycles through all of the channels (either TV or
cable, depending on which you selected), and stores all active
channels in its memory.
While the TV is cycling through the channels, the message
“Programming Now—Please Wait” appears.
6. When channel programming is complete, the message
“Completed” appears.
7. Press Channel yz to view the programmed channels.
MENU
yzx •
Channel yz