Filter
Top Products
Introduction
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
Appendix
Index
6
Connecting a cable converter box
This connection allows you to view a separate or different picture on
your PIP when you use a converter box to view premium channels.
Keep your TV selected to ANT 2 and tuned to channel 3 or 4
(whichever channel is vacant in your area). Then use the converter box
to change channels.
You will need:
• two coaxial cables
ANT
(
75
)
ANT-1
CHANNEL IN
ON OFF
OUT
RL
OUT
VIDEO
VAR
AUDIO
L/
MONO
IN
DVD IN
L
R
C
R
C
B
Y
L/
MONO
AUDIO
R
S-VIDEO
VIDEO
OUT
ANT-2
AUDIO CENTER
VIDEO 1 VIDEO 2
COLOR
STREAM
INPUT
AUDIO
R
AUDIO
INOUT
Cable converter box
Connecting a cable converter box and a VCR
This connection allows you to watch and record basic and premium
cable channels, watch videotapes, and record one channel while
watching another channel. To use the TV’s features, select ANT-1. To
view premium channels or record with the VCR, select ANT-2, tune
the TV to channel to 3 or 4 (whichever channel is vacant in your
area), and use the converter box to change channels.
You will need:
• one cable splitter
• three coaxial cables
• one pair of audio cables (one single audio cable for a mono VCR)
• one video cable
Note:
You cannot view premium channels in the
PIP window.
PIP swap is not available with this connection.
Note:
If you have a mono VCR, connect L/Mono to
VCR Audio OUT using only one audio cable.
If you have an S-VHS VCR, use an S-video
cable instead of a regular video cable for
better picture performance.
Do not connect a regular video cable and an
S-video cable to Video-1 at the same time.
TV
From Cable
TV
From Cable
Stereo VCR