Filter
Top Products
Basic features
97
NOTE
These functions depend on the connected devices.
The HDMI
™
CEC Device Control item is not available under the following
conditions:
❖
A non-HDMI
™
input is selected
❖
The Enable HDMI CEC Control item is set to Off
❖
The connected HDMI
™
CEC device is not a playback, recording or
tuner device
HDMI
™
CEC Control input source selection
If an HDMI
™
CEC device with HDMI
™
switching capability (e.g. an
amplier) is connected to the HDMI
™
input, you can select another
HDMI
™
CEC device that is connected to the master HDMI
™
device.
Use the INPUT button on the remote control or the control panel, see
“Learning about the remote control” on page 53.
Adjusting the amplifier’s audio
Using the TV’s remote control, you can adjust or mute the sound volume
of your audio system.
❖
The VOL (+ -) buttons adjust the volume level.
❖
The MUTE button turns off the sound.
1 Press the SETUP button.
2 Select Options > HDMI CEC Control Setup and press the OK
button.
3 Press the
p
/
q
(arrow) buttons to select Initial Speaker Setting
and press the OK button.
4 Press the
p
/
q
(arrow) buttons to select Amplier.
NOTE
Confirm that a connected HDMI
™
CEC device (such as DVD player, etc.) is
selected for the Amplifier input source.
NOTE
❖
You can also use this function when the audio system is connected to
the TV’s DIGITAL AUDIO OUT terminal (not HDMI
™
connection).
Select a digital audio input mode on the amplifier.
❖
These functions depend on the device connected.
Using HDMI
™
CEC Control