Filter
Top Products
55
HM196 (E/F) Web 213:276
Chapter 6: Using the TV’s advanced features
Using MPEG noise reduction
The MPEG noise reduction feature allows you to reduce
visible interference caused by MPEG compression. Choices
for MPEG noise reduction are Off, Low, Middle, and High.
Off is automatically selected when this feature is disabled
(“grayed out”).
To select the MPEG noise reduction level:
1 Press Y and open the Video menu.
2 Highlight Advanced Picture Settings and press T.
3 Press B or b to highlight the MPEG Noise Reduction
field, and then press C or c to select either Off, Low,
Middle or High.
4 To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.
Selecting the color temperature
You can change the quality of the picture by selecting from
three preset color temperatures (cool, medium, and warm), as
described below.
To select the color temperature:
1 Press Y and open the Video menu.
2 Highlight Advanced Picture Settings and press T.
3 In the Color Temperature field, select the mode you
prefer (Cool, Medium, or Warm).
4 To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.
Note: If you select one of the factory-set picture modes
(Sports, Standard, or Movie) and then change the color
temperature mode, the picture mode automatically
changes to Preference in the Picture Settings menu.
Selecting the lamp mode
You can select either the High Bright or Low Power lamp
mode.
• The High Bright mode is useful when additional picture
brightness is desired (such as in a bright room).
To select the lamp mode:
1 Press Y and open the Video menu.
2 Highlight Advanced Picture Settings and press T.
3 In the Lamp Mode field, select either High Bright or
Low Power.
4 To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.
Note: If you set the lamp mode to Low Power, each time
you turn on the TV the lamp will start out in High Bright
mode but will switch to Low Power mode after a short
period of time. You may notice a change in screen
brightness when this happens. This is normal and is not a
sign of malfunction.
Mode Picture Quality
cool blueish
medium neutral
warm reddish
DoneReset
CableClear Auto
Dynamic Contrast On
MPEG Noise Reduction
Low
ANT 1Advanced Picture Settings
Color Temperature Cool
Lamp Mode Low Power
Game Mode Off
DoneReset
CableClear Auto
Dynamic Contrast On
MPEG Noise Reduction
Low
ANT 1Advanced Picture Settings
Color Temperature Cool
Lamp Mode Low Power
Game Mode Off
DoneReset
CableClear Auto
Dynamic Contrast On
MPEG Noise Reduction
Low
ANT 1Advanced Picture Settings
Color Temperature Cool
Lamp Mode Low Power
Game Mode Off
HM196_EN.book Page 55 Tuesday, May 30, 2006 2:18 PM
Downloaded from www.Manualslib.com manuals search engine