Filter
Top Products
6
English
Connecting external equipment
Before connecting any external equipment, turn off all main power switches. If there is no switch
remove the mains plug from the wall socket.
Plug the power cord into the AC IN socket on the back of the TV.
PC/HDMI (AUDIO)
AUDIO
B B R R
RGB/PC (1) COMPONENT
HDMI
(3)
Y P /C
L R
P /C
1
2
HDMI 1/2
PC/
HDMI 1
(AUDIO)
AUDIO
RGB/PC
(3)
(4)
(1) COMPONENT
Y PB/CB
L R
NOTE:
SCART1 : (INPUT/Monitor OUT)
SCART2 : (INPUT/TV OUT)
(3)
(4)
For 26/32/37 Only
Note: SCART1 can support a Canal+ decoder.
For 19/22 Only
Note: SCART can support a Canal+ decoder.
decoder*
media recorder
decoder*
media recorder
*a decoder could be
Digital Satellite decoder or
any other compatible type.
PR/CR
*a decoder could be
Digital Satellite decoder or
any other compatible type.
AC INAC IN
Aerial cables: - - - - - - - - - - - - - - - - -
Connect the aerial to the ANT socket on the rear
of the television.
If you use a decoder and/or a media recorder it is
essential that the aerial cable is connected to the
decoder aerial socket and/or the media recorder
aerial socket and not the TV.
SCART leads: - - - - - - - - - - - - - - - - -
Connect the video recorder IN/OUT or decoder
TV socket to the television. Connect the media
recorder SAT socket to the decoder MEDIA REC.
socket.
Before running Auto Scan set your decoder and
media recorder to Standby.
The phono sockets alongside the COMPONENT
VIDEO INPUT sockets will accept L and R audio
signals.
The phono sockets alongside the VIDEO INPUT
socket will accept L and R audio signals. These
sockets are located on the side of the TV. (See
the next page.)
HDMI™ (The High-Denition Multimedia
Interface) is for use with a DVD, decoder or
electronic equipment with digital audio and video
output. It is designed for best performance with
1080i high-denition video signals but will also
accept and display VGA, SVGA, XGA, WXGA,
SXGA, 480i, 480p, 576i, 576p, and 720p signals.
NOTE: Although this television is able to connect
to HDMI equipment it is possible that some
equipment may not operate correctly.
A wide variety of external equipment can
be connected to the back of the television,
refer to the relevant owners manuals for all
additional equipment.
If the television automatically switches over to
monitor external equipment, return to normal
viewing by pressing the desired programme
position button. To recall external equipment,
press
to select.
HDMI, the HDMI logo and High-Denition Multimedia Interface are
all trademarks or registered trademarks of HDMI Licensing, LLC.