Toshiba BDX1100KC Blu-ray Player User Manual


 
19
English
[Video Adjust]
Select a predened setting of the video.
1. Press OK .
2. Press/ to adjust the video
Brightness, Contrast, Hue and Saturaon.
{Brightness}- press / to adjust
the brightness of display, goes left
means dark and right means bright.
{Contrast}- press / to adjust the
contrast of display, goes left means
low contrast and right means high
contrast.
{Hue}- press / to adjust the Hue
of display, goes left means low hue
and right means high hue.
{Saturation}- press / to adjust
the saturation of display, goes left
means low Saturation and right means
high saturation.
3. Press RETURN to exit.
Brightness
Contrast
Hue
Saturation
RETURN
ExitChange
[Sharpness]
Select the level of sharpness: High,
Medium, Low
{High} - Select High sharpness level
{Medium} - Select Medium sharpness
level
{Low} - Select Low sharpness level
[Motion Video Process]
TV
Video Mode
Video Process
Motion Video...
... Display Setting...
SETUP
Exit
Move cursor key to select menu option
then use “OK” key to select
[Video Mode]
Select the output mode of video,options
include: Standard, Vivid, Smooth, these
can change the output display.
{Standard} output video signal without
any processing and in standard mode.
{Vivid} output video signal in vibrant color
mode.
{Smooth} output video signal in smooth
mode.
Audio Setting
1. Press SETUP
[General Setting] menu is displayed.
2. Press to select [Audio Setting],
then press .
3. Select an option, press to access.
SETUP
Exit
Audio Output
Spdif
PCM
PCM
48K
HDMI
Down_samp
OffDRC
... Audio Setting...
Move cursor key to select menu option
then use “OK” key to select
4. Press / to select a setup option and
press
5. Select the setting you wish to change
and press OK to conrm.
- Press to return to the previous
menu.
- Press SETUP to exit the menu.
[Audio Output]
[Spdif]
Select the output mode of COAXIAL
jack, options include Bitstream, PCM,
Re-encode and Off.
{Bitstream} – Output digital signal
without any processing.
{PCM} – Output digital signal with
processing, only two channels export.
{Re-encode} – Auto select signal type
from COAXIAL jack according to the
Audio stream on disc.
{Off} – No output for S/PDIF.
[HDMI]
Select the output mode of HDMI Out
jack, options include Bitstream, PCM,
Re-encode and Off.
{Bitstream} – Output HDMI digital
signal without any processing.
{PCM} – Output HDMI digital signal
with processing, only two channels
export.
{Re-encode} – Auto select signal type
from HDMI Out jack according to the
Audio stream on disc.
{Off} – No output for HDMI.
[Down_samp]
Select the digital audio signal sampling
frequency.
{48K} – For discs recorded at sampling
rate of 48 kHz.
{96K} – For discs recorded at sampling
rate of 96 kHz.