Toshiba BDX5400 Blu-ray Player User Manual


 
English
23
Cannot play back JPEG les from
a disc.
Cannot play DivX
®
les
Make sure that the disc was recorded in the JPEG/ISO
format.
Make sure that the le was recorded in the H.264 or
MPEG-4 format.
Cannot play MP3 les from a disc.
Cannot nd a JPEG le.
Cannot nd a MP3 le.
Cannot upgrade SW.
Sometimes the options of setup
menu cannot be selected.
Make sure that the disc was recorded in the ISO format.
Make sure that the bit rate of the MP3 les is between
8 and 320 kbps.
Make sure that the sample rate of the MP3 les is 32kHz,
44.1kHz or 48kHz.
Make sure that the selected group (folder) does not
contain more than 9,999 les for DVD and 999 les for
CD.
Make sure that the le extension is .jpg, .JPG, .jpeg or
.JPEG.
Make sure that the selected folder does not contain more
than 9,999 les for DVD and 999 les for CD.
Make sure that the le extension is .mp3 or .MP3.
When you upgrade the system with USB ash drive, you
should make a new folder named UPG_ALL, and copy the
upgrade le into this folder.
When you upgrade the system by network, please
make sure the player is connected to the internet when
upgrading the SW.
When playing a DVD disc or Blu-ray Disc™, press STOP
button once, the player will go into stop resume mode,
meanwhile you cannot change some settings in setup
menu such as language subitem menu, audio, subtitle
etc. If you want to change that, press STOP button
twice, the player will go into full stop mode, then you
can do it.
Cannot connect to the network
Check that the LAN cable connection is properly made.
Check that the broadband router and/or modem is
correctly connected.
Check the Network Connection Setting.