Filter
Top Products
English
7
Connecting external equipment
Before connecting any external equipment, turn off all main power switches. If there is no switch
remove the mains plug from the wall socket.
media recorder
decoder*
CABLE HOLDER
FIXING STRAP
HDMI™ INPUT
SOCKETS
SCART 2 (EXT2)
COMPONENT VIDEO (EXT3)
SCART 1 (EXT1)
*
a decoder could
be Digital Satellite
or any other
compatible decoder.
☛
IN/OUT
MEDIA REC.
TV
SAT
NOTE: For 1080p it is recommended that approved HDMI
cable up to 5m long is used. If the unit has DVI output a
special conversion cable from DVI to HDMI will be required.
NOTE: Although this television is able to connect to HDMI
equipment it is possible that some equipment may not
operate correctly.
A wide variety of external equipment can be
connected to the back of the television, therefore the
relevant owners manuals for all additional
equipment must be referred to.
We recommend SCART 1 for a decoder and SCART 2 for a
media recorder.
If connecting S-VIDEO equipment, set the INPUT for EXT2.
See page 23.
If the television automatically switches over to monitor
external equipment, return to normal television by pressing
the desired programme position button. To recall external
equipment, press
B
to select between DTV, EXT1, EXT2,
EXT3C, HDMI1, HDMI2, PC or ATV.
HDMI, the HDMI logo, and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing, LLC.
Aerial cables:
Connect the aerial to the socket on the rear of the television.
If you use a decoder* and/or a media recorder it is essential
that the aerial cable is connected through the decoder
and/or through the media recorder to the television.
SCART leads:
Connect the video recorder IN/OUT socket to the television.
Connect the decoder TV socket to the television. Connect
the media recorder SAT socket to the decoder MEDIA REC.
socket.
Before running Auto tuning put your decoder and media
recorder to Standby.
The phono sockets alongside the COMPONENT VIDEO
INPUT sockets will accept L and R audio signals.
In addition there is a fixed external audio ouput which
enables the connection of a suitable Hi-Fi unit. Make sure
the Speaker option in the Sound menu is set to Off.
HDMI™ (High-Definition Multimedia Interface) is for use with
a DVD, decoder or electrical equipment with digital audio
and video output. It is designed for best performance with
1080i and 1080p high-definition video signals but will also
accept and display 480i, 480p, 576i, 576p and 720p
signals.
The cable holder
can be used for aerial,
media recorder and
audio cables. Do not
use as a handle and
remove all cables
before moving the
television.
☛
C3000P Eng OM 26/1/07 4:48 pm Page 7