Toshiba SD-R1102 DVD VCR Combo User Manual


 
13
DRIVE CONNECTORS – SD-R1102
Figure 1.SD-R1102 Combo Drive Rear Panel - Connectors
Power
Connector
Power is supplied to your DVD drive by the connection with your computer's +5V/+12V
power cable to the power socket at the back of drive. One side of the plug has chamfered
edges, so the power connector fits only one way
CAUTION: Severe damage to the Drive circuits may occur if power cable is plugged in
upside-down with power ON
Audio
Connectors
Supplies Analog and Digital sound to your system.
ATAPI
Connector
The SD-R1102 DVD drive is connected to your computer system through the ATAPI
connector
Mode
Select
Jumper
The mode select jumpers are 6 straight angle pins located on the rear of the DVD drive.
By placing a jumper on the pins, you can select the following functions: CL (CSEL), SL
(Slave) or MA (Master). (see Setup for additional information).