Filter
Top Products
Setting the output resolution for the HDMI output that best matches your TV’s capabilities
™
Audio setting for the HDMI connection
™
Set “Digital output mode” of “A/V Output - Audio Settings” to “PCM”( page 49).
Notes
• When the HDMI connection is used, “Brightness Setting” and “E.B.L” of “A/V Output - Picture” are not available.
• Depending on the equipment connected to this recorder, such as a TV or a projector, no sound may be
output. In this case, set “Digital output mode” ( page 49) to “PCM”.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of
HDMI Licensing LLC.
Connections
Connecting to a TV with the HDMI terminal ( Continued )
*Displayed on the TV screen. Do not appear when the
HDMI OUTPUT terminal is not connected or the
HDMI connection is not verified. But HDMI indicator
lights up.
Set an output signal from the HDMI OUTPUT terminal of the recorder in accordance with your TV’s input signal.
HDMI indicator
RESOLUTION
V.OUTPUT
Press RESOLUTION button on the remote control
Press V.OUTPUT button on the remote control to
light up the HDMI indicator.
changes output signals as below. Select the
appropriate output signal.
HDMI indicator Video output signal*
480p 480p (progressive)
720p 720p (progressive)
1080i 1080i (interlace)
Press
Press
31
Introduction
Connections
Quick Start
Guide
Playback
Recording
Setup Menu
Others