Toshiba D-R4SU DVD Recorder User Manual


 
44
Programing a recording (Continued)
1:00pm 1:54pm
1:20pm
20 minutes
extend
Time Shift
2:14pm
Shifting the time period of a recording (Time
Shift)
If a prior TV program extends beyond its scheduled
time and into one that you programmed, you can shift
the programmed start and end time of the recording.
1) Press EASY NAVI.
EASY NAVI Main Menu appears.
2) Press
/ / / to select Timer Recording,
then press SELECT/ENTER.
REC MENU appears.
3) Press
/ to select a timer program you want
to shift the time period.
4) Press EXTEND.
Start and End are ready to be input.
5) Press EXTEND repeatedly.
Each time you press the button, Start and End is
shifted in 10 minutes intervals to, up to 60 minutes
later.
6) Press SELECT/ENTER.
7) Press EASY NAVI to exit.
Note
After you shifted the time of a timer program which will be
repeated daily or weekly, you should restore the original
start/stop time for future recordings.
Adding a timer program
1) Press EASY NAVI.
EASY NAVI Main Menu appears.
2) Press
/ / / to select Timer Recording,
then press SELECT/ENTER.
REC MENU appears.
3) Press
to select a blank line, then press
SELECT/ENTER.
4) Press
/ to select the item, then press
ADJUST to set the item.
5) When complete, press SELECT/ENTER.
6) Press EASY NAVI to exit.
Note
While the recorder is preparing for or executing a
programmed recording, you cannot add a timer program
which will start within 5 minutes and 15 seconds from the
current time.
Deleting a timer program
1) Press EASY NAVI.
EASY NAVI Main Menu appears.
2) Press
/ / / to select Timer Recording,
then press SELECT/ENTER.
REC MENU appears.
3) Press
/ to select a timer program you want
to delete.
4) Press QUICK MENU.
Quick Menu appears.
5) Press
/ to select Program cancel, then
press SELECT/ENTER.
Check the message, then delete the entry.
6) Press EASY NAVI to exit.
Note
You cannot delete a timer program while another is
executed.
Correcting a timer program
1) Press EASY NAVI.
EASY NAVI Main Menu appears.
2) Press
/ / / to select Timer Recording,
then press SELECT/ENTER.
REC MENU appears.
3) Press
/ to select a timer program you want
to change, then press SELECT/ENTER.
4) Press
/ to select an item, then press
ADJUST to set the item.
5) Press SELECT/ENTER.
The modification is registered.
6) Press EASY NAVI to exit.
Important
You cannot correct a timer program within 5 minutes before
the recording start time. You can only delete the timer
program.
Note
You can program a timer recording whose start time has
already passed, unless the another program recording will
start within 5 minutes. The portion of the program before
the recording starts cannot be saved.
e.g.
Recording