Filter
Top Products
76
H.264 Models
Note The RED IPS record slider cannot exceed the BLUE PPS capture slider.
Note The Software will not allow the maximum available Frames to be exceeded.
Frame Select Blue Slider: Sets the PPS recorded during intensive recording and available for viewing on a remote client PC.
Red Slider: Sets the PPS recorded by the DVR during normal recording.
Resolution Affects the total number of frames per second that are available.
Video Quality Lower quality video has a smaller file size but appears more pixilated.
Sensitivity Sets the Keyframe refresh rate. Adjusting this setting can have negative effects on video quality.
Note Do not change the default setting unless instructed by a system administrator.
Enable Video Out to Spot Monitor (4 Channel and H.264)
1. Click Setup on the Display screen.
2. Click Frame Setup.
3. Select the Video Out check box to enable the appropriate channels.
4. Define the Video Out time (seconds to display each channel on spot monitor).
5. Click Apply.
Reset to Default Settings
Video Quality
Recording Resolution
Frame Selec
t
No. of Recording Frames
Selected
Camera Channel
Display Time o
f
Selected Channels
Output to Video Out Display