Filter
Top Products
22
2
Chapter
2
Connections
Connecting to an TV (Continued)
Finally connect the supplied
power cord to a wall outlet.
Component video cables
(not supplied)
To COMPONENT OUTPUT
To use the analog sound output, connect these jacks
to audio input jacks on your TV using the audio cable.
To use the optical digital
output, use an optical
cable to connect this jack
to an optical audio input
on a device capable of
processing a Dolby Digital,
DTS bitstream or PCM audio. ( page 24)
After completing the connection, proceed to page 23 to make the setting.
After completing the connection, proceed to page 23 to make the setting.
Connect either.
Finally connect the supplied
power cord to a wall outlet.
480i/576i output only regardless of the resolution
settings or the connections of other output jack.
Audio/video cable (supplied)
S-VIDEO cable (not supplied)
To use the analog sound
output, connect these jacks
to audio input jacks on your
TV using the audio cable.
To S-VIDEO
To VIDEO
*
*
To use the optical digital output,
use an optical cable to connect
this jack to an optical audio input
on a device capable of processing
a Dolby Digital, DTS bitstream
or PCM audio. ( page 24)
Via component video input
Via S-VIDEO or VIDEO (yellow) input
This player supports simultaneous output of video on its HDMI and component video ports. However, some discs may restrict
output of video on the component video ports when viewing high defi nition content or up-converted DVD content.
The resolution on the HDMI output will be the same as the resolution output on the component video output. Thus,
because the HDMI output can change automatically to match the maximum available resolution of your display, if you
connect both the HDMI output and component output, the resolution on the component output will change if the HDMI
output Auto-adjusts.
HD-E1KY_02_E 22HD-E1KY_02_E 22 06.12.15 4:15:54 PM06.12.15 4:15:54 PM