Filter
Top Products
31
CAMERA SETUP
Enable VMD (Motion Based) Network camera motion detection. (Only available on select network video devices.)
Setup a New Camera
1. Attach camera to the rear of the DVR chassis.
2. Click the Setup button on the Main Display Screen.
3. Click the Camera Setup button to open the Camera Setup Display.
4. Select the channel that corresponds with the new camera from the Select Camera List.
5. Enter a name for the camera in the Camera Name box.
6. Adjust the Brightness, Hue and Contrast if necessary.
7. Select the appropriate sensors to associate with the camera.
8. Click the Apply button when finished.
Define Camera Name
Adjust
• Brightness
• Hue
• Contrast
A
pply System Defaults
to Selected Camera
A
pply Current Settings
to all Cameras
A
pply System Defaults
to All Cameras
Selected Camera
Dis
p
la
y