Filter
Top Products
24
■ CHANNEL UP/DOWN
Press and release
CHANNEL or . The channel
automatically stops at the next channel set into
memory. For proper operation, before selecting
channels, they should be set into the memory. See
page 26 “To memorize channels”.
■ CHANNEL RETURN
This button allows you to go back to the last channel
selected by pressing CHANNEL RETURN. Press
CHANNEL RETURN again to return to the last channel
you were watching.
■ MUTE
Press MUTE to switch off the sound. The unit’s sound
will be silenced and “MUTE” will briefly appear on the
screen. The sound can be switched back on by pressing
this button again or one of VOLUME
/ .
SLEEP
120
■ SLEEP
To set the unit to turn off after a preset amount of time,
press SLEEP on the remote control. The clock will
count down 10 minutes for each press of SLEEP (120,
110, ...10, 0). After the sleep time is programmed, the
display will appear briefly every ten minutes to remind
you that the sleep timer is operating. To confirm the
sleep timer setting, press SLEEP and the remaining
time will be displayed for a few seconds. To cancel the
sleep timer, press SLEEP repeatedly until the display
turns to 0.
■ HEADPHONES
Insert a stereo headphones (not supplied) with a 1/8”
mini plug into the PHONES jack on the front panel. If
you connect headphones, the sound from TV speakers
is muted.
• Model MW27FP1 has a door on the front panel. Please
open it to access the PHONES jack.
CHANNEL
SLEEP
TV operation (continued)
CHANNEL /
SLEEP
VOLUME /
CHANNEL RETURN
MUTE
TV operation
MUTE
MUTE
TV operation
5L00201C [E]p22-26 20/4/04, 16:0524