Toshiba MW24F52 TV DVD Combo User Manual


 
25
Basic setup
SLEEP
To set the unit to turn off after a preset amount of time,
press SLEEP on the remote control. The clock will
count down 10 minutes for each press of SLEEP (120,
110, ...10, 0). After the sleep time is programmed, the
display will appear briefly every ten minutes to remind
you that the sleep timer is operating. To confirm the
sleep timer setting, press SLEEP and the remaining
time will be displayed for a few seconds. To cancel the
sleep timer, press SLEEP repeatedly until the display
turns to 0.
HEADPHONES
Insert a stereo headphones (not supplied) with a 1/8”
mini plug into the PHONES jack on the front panel. If
you connect headphones, the sound from TV speakers
is muted.
CHANNEL UP/DOWN
Press and release
CH or . The channel auto-
matically stops at the next channel set into memory.
For proper operation, before selecting channels, they
should be set into the memory. See page 27 “To
memorize channels”.
CHANNEL RETURN
This button allows you to go back to the last channel
selected by pressing CH RTN. Press CH RTN again to
return to the last channel you were watching.
MUTE
Press MUTE to switch off the sound. The unit’s sound
will be silenced and “MUTE” will appear briefly on the
screen. The sound can be switched back on by pressing
this button again or one of VOL
+/.
SLEEP
120
MUTE
SLEEP
MUTE
CH /
CH RTN
* Model MW24F52 has a door on the front panel.
Please open it to access the PHONES jack and the
AUDIO (L/R)/VIDEO IN (LINE IN 2) jacks.
0–9
POWER
TV/VCR
TV operation
VOL +/–
5W70101A [E]p23-27 30/1/06, 2:29 PM25