Filter
Top Products
43
Other functions (VCR)
To AUDIO (R) IN
To AUDIO (L) OUT
Audio/Video cable (not supplied)
Playback VCR
To VIDEO OUT
To AUDIO (R) OUT
Recording VCR
Duplicating a video tape
If you connect the unit to another VCR or Camcorder, you can
duplicate a previously recorded tape. Make all connections before
turning on the power.
Duplicating a video tape
For duplicating a previously recorded tape from a
camcorder, follow the camcorder manufacturer’s
instructions. A typical camcorder dubbing hookup is
shown above.
Audio/Video cable (not supplied)
To AUDIO (R) IN
To AUDIO (L) IN
To VIDEO IN
Recording VCR
To AV Jack
Playback Camcorder
Connection with Camcorder
• Select “LINE2” on step 2.
Press SPEED to select the desired tape speed
SP or SLP.
It is recommended to set the Speed to
the SP mode on the recording VCR
for best results.
1
Press INPUT once or twice to select AUDIO/
VIDEO input position.
“LINE1” or “LINE2” will appear on the
screen.
2
Press PLAY on the playback VCR or camcorder.
3
Press REC.
4
Press STOP when you finish after duplicating.
5
LINE1: on the rear panel
LINE2: on the front panel
Preparation:
•Press TV/VCR to select the TV/VCR mode.
•Load a cassette tape with the erase prevention tab
intact.
•Load a previously recorded tape into the playback
VCR or Camcorder.
LINE1
To VIDEO IN
To AUDIO (L) IN
Connection with second video recorder
• Select “LINE1” on step 2.
Illustration of
MW20F52
TV/VCR
INPUT
STOP
REC
SPEED
Other functions (VCR)
The unauthorized recording, use, distribution, or revision of
television programs, videotapes, DVDs and other materials,
is prohibited under the Copyright Laws of the United States
and other countries, and may subject you to civil and/or crimi-
nal liability.
5W70101A [E]p43-44 30/1/06, 2:31 PM43