Filter
Top Products
Next Generation Home Products manual • version 1.0 • page 2
CodeScan
™
is a trademarks of US Electronics, Inc.
All other trademarks are the property of their respective owners.
11
TV/VCR COMBO CODES
12
SATELLITE CODES
14
RECALLING A DEVICE CODE
Perform the following steps to read the code currently set for a device. This is useful for retrieving
a device code that was set using the CodeScan
™
method.
Aiwa 251
Audio Dynamics 238
Broksonic 219 • 226
Curtis Mathes 231 • 241
DBX 238
Daewoo 247 • 250 • 252
Electrohome 240
Emerson 219 • 223 • 226 • 251 • 253
Funai 251
General Electric 231 • 233 • 241 • 248
Goldstar 223 • 230 • 238 • 254
Harman Kardon 238
Hitachi 231 • 241 • 251
JC Penney 223 • 231 • 238 • 241 • 242
JVC 234 • 235 • 238
Kenwood 235 • 251
LXI 223 • 251 • 254
MGA 240
Magnavox 231 • 236 • 237 • 241 • 251
Marantz 237 • 238
Marta 223
Memorex 223 • 242 • 244 • 245 • 248 • 251
Mitsubishi 239 • 240
Optimus 242
Orion 219 • 226
Panasonic 231 • 241 • 242
Philco 236 • 237 • 251
Philips 223 • 236 • 237 • 251
Pioneer 235
Proscan 233
Pulsar 248
Quasar 231 • 241 • 242
RCA 231 • 233 • 241 • 251
Radio Shack 230 • 242
Realistic 223 • 251
Runco 243
Samsung 221 • 244 • 245 • 246 • 247
Sansui 219 • 235
Sanyo 244 • 245
Scott 247
Sears 223
Signature 251
Sony 232
Soundesign 251
Sylvania 237 • 240 • 251
Symphonic 251
Tandy 251
Teac 251
Technics 242
Teknika 223 • 251
Toshiba 240 • 247
Totevision 223
Vector Research 238
Victor 235
Video Concepts 238 • 251
Wards 251
Yamaha 238 • 251
Zenith 219 • 223 • 235 • 248 • 249 • 251
4DTV 121
Alphastar 125
Amway 139
Birdview 235
CI Satellite 146
Cable Innovations 183
Century 148
Channel Master 147
Chaparral 214 • 215 • 216 • 217
Cheyenne 216
Citoh 145
Conifer 142
Curtis Mathes 174
DIRECTV 124 • 132 • 093 • 094 • 095 • 096 • 097 • 098
DISH Network 119
DISHPlayer 100
DX Antenna 115 • 144 • 213
Drake 149 • 187 • 188 • 189 • 191 • 194
Echostar 113 • 119 • 137 • 150 • 204 • 205 • 206 • 207 • 208
Express VU 119
Fujitsu 186
General Instrument 121 • 122 • 134 • 151 • 152 • 153 • 154
171 • 172 • 183 • 196 • 197 • 202
Hitachi 124 • 132
Homecable 226
Houston Tracker 113
Hughes Network 124 • 132 • 093 • 094 • 095 • 096 • 097 • 098
IQ 212
Insight 124
Intersat 241
JVC 119
Janeil 178 • 186
Kenwood 243
Legend 137 • 204
Macom 134 • 174
Magnavox 117 • 126
Memorex 117 • 137
Next Level 122
Norsat 142
Optimus 117
Orb 223
Panasonic 123 • 178
Pansat 246
Philips 117 • 126 • 176
Pico 139
Primestar 049 • 115
Prosat 138
Proscan 110 • 116 • 141
Quick Draw 144
RCA 110 • 116 • 141
Radio Shack 183 • 196 • 197
Ramsey 139
Realistic 230
Rural Cable 196
STS 212 • 213
Samsung 108
Sierra 216
Sony 112
Star Choice 122
Star Sight 109
Star Trak 136 • 218 • 219 • 222 • 223
Strong 136
Super Guide 253
TCE 110
TeeCom 248 • 251
Toshiba 133 • 134 • 174 • 187
Uniden 117 • 126 • 180 • 181 • 182 • 183 • 184
224 • 226 • 227 • 228 • 230 • 232
Video Cipher II 186
Viewstar 185
Zenith 149 • 174 • 186
15
Problem
I programmed the remote, but it won’t work my TV, VCR, or Satellite Receiver.
Solution
You may have entered the wrong code (or the correct code might not be listed). Try the
Code
Scan
™
procedure. It will allow you to cycle through all the codes until you find one that works.
Weak batteries may cause the remote to only operate one device or operate intermittently.
Replace weak batteries with
NEW alkaline batteries. If you are sure the batteries are good, try
rolling them with your finger (while they are in the remote control) to ensure a good connection.
Finally, make sure that nothing is blocking the signal from the remote control from reaching
your TV, VCR, or Satellite Receiver; and make sure that you are pointing the remote control at
the correct device when you are pressing a key on the remote.
Problem
My remote control doesn’t operate my combination TV/VCR.
Solution
If none of the TV/VCR combo codes work, you may need to set up separate TV and VCR codes
to operate your TV/VCR.
Problem
I don’t get any picture and/or sound from my TV.
Solution
Make sure all cables are connected properly and that all devices are powered on. Consult
related owners manuals for specific installation and operation instructions for each device.
TROUBLESHOOTING
y
x
y
x
y
x
Press and hold a mode key until the LED begins flashing.
Press
SELECT. The LED will flash each of the three digits in the code. A pause separates
each digit. For example, three flashes represent the number 3, and a rapid flicker
represents 0, so a code of 103 will be shown as:
FLASH <pause> FLICKER <pause> FLASH FLASH FLASH
Count and record the sequence of flashes to determine the three-digit code.
b
c
d
Press and hold a mode key until the LED begins flashing.
Press
POWER twice. The LED should flash rapidly and turn off.
Manually turn on all devices (TV, SAT, DVD, VCR). Test the master Power Control
function by pressing
POWER. All the devices should turn off.
13
b
c
d
MASTER POWER CONTROL
You can program your remote to turn all of your remote-controlled devices (TV, SAT, DVD, VCR) on and
off simultaneously when you press POWER. All devices must be in direct line of sight to ensure proper
operation. Perform the following steps to enable or disable master power control for all devices: